Effect of sintering temperature on microstructure and properties of graphene oxide/2024Al composites prepared by SPS
LIU Kunding1，2，YANG Bin1，WANG Aiqin1，2，XIN Yaolong11
（1. College of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023,
China; 2. Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal
New Materials and Advanced Processing Technology, Luoyang 471023, China）
Abstract：In this paper, with graphene oxide and 2024Al powder as raw materials, graphene oxide (GO)/2024Al
composites with different content of GO and sintering temperatures were prepared by electrostatic self-assembly+
spark plasma sintering (SPS) process, and the microstructure and mechanical properties of the composites were
characterized and tested. The results show that graphene oxide is uniformly distributed in the composite powder
and coated on the surface of Al particles. The second phase in the composite is mainly the Al2Cu phase, and the
second phase and graphene oxide are distributed in a network along the grain boundaries. The compressive
strength of composites with 0.5%, 1%, and 2% graphene oxide (GO) sintered at 550 ℃ increases and then de‐
creases. The compressive strength increases to 428.02 MPa and 540 MPa, respectively, an increase of 12.5% and
42% compared with the matrix.
刘坤定，杨 斌，王爱琴，信要龙. 烧结温度对放电等离子烧结（SPS）制备氧化石墨烯/2024Al复合材料的微观组织和性能影响[J]. 粉末冶金工业, 2023, 33(05): 25-30.
LIU Kunding，YANG Bin，WANG Aiqin，XIN Yaolong. Effect of sintering temperature on microstructure and properties of graphene oxide/2024Al composites prepared by SPS. Powder Metallurgy Industry, 2023, 33(05): 25-30.
2023, Vol. 33 
