Research status on SiC and Si hybrid particle reinforced Al matrix composites
HAN Hui-hui1,WANG Ai-qin1,2,XIE Jing-pei2
1. College of Material Science and Engineering, He’nan University of Science and Technology, Luoyang 471023, China 2. Non-Ferrous Metals Coordination and Innovation Center of He’nan Province, Luoyang 471023, China
Abstract：Due to the precipitation of Si particles in the preparation process SiC particle reinforced aluminum matrix composites containing Si, the composite turns into SiC and Si hybrid particle reinforced composites. SiC and Si hybrid particle reinforced aluminum matrix composites have high specific strength and stiffness, good wear resistance and fatigue resistance, good dimensional stability, lightweight and other excellent properties. It is widely used in aviation, aerospace, electronic appliances industries. The research status on SiC and Si hybrid particle reinforced aluminum matrix composites and several preparation methods of the composites were introduced. The defects existing in the microstructure and influencing factors of composite performance were analyzed. The application prospect of SiC and Si particle reinforced aluminium matrix composites was also proposed.
韩辉辉，王爱琴 ，谢敬佩. SiC和Si混合颗粒增强铝基复合材料的研究现状[J]. , 2015, 25(06): 66-71.
HAN Hui-hui,WANG Ai-qin,,XIE Jing-pei. Research status on SiC and Si hybrid particle reinforced Al matrix composites. , 2015, 25(06): 66-71.
[1] 于化顺. 金属基复合材料及其制备技术[M ].北京:化学工业出版社,2006.[2] LiuCheng,QinShuyi,ZhanGuoding,etal. Micromechanical properties of high fracture Performance SiCp-606lAl/606lAl composite. Mat Sci Eng,2002,A332:203～209.[3] Donnell GO, Looney L. Production of aluminium matrix composite components using conventional PM technology [J]. Material Science and Engineering A,2001,303 :292～301.[4] 尹洪峰，任耘，罗发．复合材料及其应用[M]．陕西：陕西科学技术出版社，2003．[5] LEE Jaechul,AHN Jaepyoung,SHI Zhongliang,etal. Modification of the Interface in SiC/Al Composites[J].Metallurgical and Materials Transactions A,2000,31（9）:2361～2368[6] Fan J Z, Yao Z K. Assessment of the SiCp distribution uniformity in SiCp/Al composites made by powder metallurgy [J].Rare metals,1996,15(3):208～213.[7] 刘勇兵,黄起.金属基复合材料在汽车上的应用与展望[J].汽车技术,1994，(9):35～41. [8] Kiyoshi Mizuuchi, Kanryu Inoue, Yasuyuki Agari,etal. Processing of Al/SiC composites in continuous solid–liquid co-existent state by SPS and their thermal properties [J]. Composites: Part B, 2012,43 :2012～2019.[9] Taha M A, El Mahallawy NA, El Sabbagh AM. Some experimental data on workability of aluminium particulate-reinforced metal matrix composites[J]. Journal of Materials Processing Technology,2008,202 :380～384.[10] Ramachandra M, Radhakrishna K. Effect of reinforcement of flyash on sliding wear, slurry erosive wear and corrosive behavior of aluminium matrix composite [J]. Science Direct,2007, 262 :1450～1462.[11] Seyed S M, Reihani. Processing of squeeze cast Al6061-30vol% SiC composites and their characterization [J].Materials and Design, 2006, (27) :216～222.[12] KWAKJS, KIMYS. Mechanical Properties and Grinding Performance on Aluminum - based Metal Matrix Composites[ J ].Journal of Materials Processing Technology, 2008 (201) :596～600.[13] Satish Tailor, V. K. Sharma, R. M. Mohanty, etal. Microstructure, Adhesion and Wear of Plasma Sprayed Al Si-SiC Composite Coatings[J]. Journal of Surface Engineered Materials and Advanced Technology, 2012, 2 :227～232[14] 毛天祥. 复合材料的现状与发展[M].合肥:中国科学技术大学出版社,2000．[15] 张恩霞. SiCp/ZL102复合材料成型性能与复杂压铸件制备[M].南京:南京理工大学, 2003:38～40.[16] 张静，张国玲，于化顺等. Si含量对SiCp/Al复合材料组织和性能的影响[J].功能材料, 2009, 40(S):347～350.[17] 何昊等. SiC颗粒表面处理对SiC／Al-30Si复合材料组织及性能的影响[J]. Hot Working Technology.2013,42(6):34～39.[18] 李薇,陈鼎. 喷射沉积Al-20Si／SiCp复合材料的热疲劳行为[J]. 湖南大学学报.2010,37(1):54～58.[19] 袁广江,章文峰,王殿斌等. SiCp 增强铝基复合材料制备及机加性能研究[J].复合材料学报, 2000, 17( 2): 38～41.[20] 张国定. 金属基复合材料的界面问题[ J] .材料研究学报, 1997 ,11:649～651.[21] 郭建，沈宁福. SiC颗粒增强Al基复合材料中有害界面反应的控制[J].材料科学与工程,2002,20（4）：605～608.[22] 陈建，潘复生等. Al/SiC界面结合机制的研究现状[J].轻金属,2000,9 :52～54.[23] 李明伟. SiC颗粒增强铝基复合材料微观结构及力学性能研究[D]. 硕士学位论文,北京：北京交通大学,2004.[24] 樊建中, 左涛等. 高能球磨粉末冶金制备工艺对15%SiCp/ 2009Al复合材料性能的影响[J]. 复合材料学报,2004,21(4):92～98.[25] 王锋. 喷射成形过共晶Al-Si合金的研究[J].金属学报,1999,35(2):121～124．[26] 甄子胜. 喷射沉积Al-30Si组织及其半固态保温转变规律[J]. 材料科学与工艺,200l,9(2):162～166．[27] 师昌绪.新型材料与材料科学[M].北京:科学出版社,1988.[28] 鲍寅祥，张晓泳，周科朝．颗粒在液相中溶解-析出过程的蒙特卡罗模拟[J]．粉末冶金材料科学与工程,2012,17(1):18～23．[29] WANG Zhang-wei, SONG Ming, SUN Chao, et al. Effects of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al-Cu alloy composites[J]. Mater. Sci. Eng. A, 2010, 527: 6537～6542．[30] 黎常浩,陈振华等.喷射沉积SiCp/Al-20Si复合材料高周疲劳行为研究[J].机械工程学报,2012,48(10):39～44.[31] 陈聪聪. 颗粒增强铝基梯度复合材料摩擦磨损性能的研究[D].硕士学位论文,长沙: 湖南大学材料科学与工程学院, 2006.[32] 杨伏良，易丹青．Al-Si合金粉末的高能球磨及其表征[J]．中南大学学报，2008，39(1):29～31．[33] 杨梅君. SiC<,p>/Al电子封装复合材料的SPS烧结及性能研究[D]. 硕士学位论文,武汉:武汉理工大学,2006.[34] 刘凤国. SiC颗粒增强铝基复合材料增强体颗粒预处理及工艺研究[D].硕士学位论文,沈阳:沈阳理工大学,2010.[35] 郭建, 刘秀波. SiC颗粒加热预处理工艺对SiC/Al复合材料制备的影响[J].材料热处理学报，2006，27（1）：20～27.[36] 华小珍, 李多生等. 高比例SiCp/Al复合材料热膨胀系数的研究[J ].南昌航空工业学院学报(自然科学版),2003,17 (2):13～16.[37] 王爱琴等. 颗粒尺寸及分布均匀性对SiC／A1-30Si复合材料组织性能的影响[J].粉末冶金技术,2013,31(1):9～13.
2015, Vol. 25 
