Abstract:CH3NH3PbI3 perovskite light absorption material was prepared by solution process and characterized by XRD, infrared spectrum and UV-visible spectrum. The effect of different annealing temperature on crystal structure and properties of CH3NH3PbI3 perovskite material was investigated. The results show that the crystal structure and properties of material are affected by temperature. The best state of crystallinity and absorbance are observed at 85 ℃. The average grain size of CH3NH3PbI3 perovskite material is about 375 ?, and the material band gap energy of 1.62 eV is calculated by Tacu relation.
杨 锋,王恩泽,张政权. 温度对CH3NH3PbI3钙钛矿晶体结构和性能的影响[J]. , 2016, 26(04): 23-26.
YANG Feng,WANG En-ze,ZHANG Zheng-quan. Effect of annealing temperature on the crystal structure and properties of CH3NH3PbI3 perovskite. , 2016, 26(04): 23-26.
[1]Wehrenfennig C, Eperon G E, Johnston M B, et al.High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites[J].Advanced Materials, 2014, 26(10):1584-1589[2]Minemoto T, Murata M.Impact of work function of back contact of perovskite solar cells without hole transport material analyzed by device simulation[J].Current Applied Physics, 2014, 14(11):1428-1433[3] Tripathi B, Bhatt P, Yadav P, et al.Temperature induced structural, electrical and optical changes in solution processed perovskite material: Application in photovoltaics[J].Solar Energy Materials & Solar Cells, 2015, 132:615-622[4]Yang W S, Noh J H, Jeon N J, et al.High-performance photovolatic perovskite layer fabricated through intramolecular exchange[J].Science, 2015, 348(6240):1234-1237[5] Xie J, Liu Y, Liu J, Lei L, et al.Study on the correlations between the structure and photoelectric properties of CH3NH3PbI3 perovskite light-harvesting material[J].Journal of Power Sources, 2015, 285:349-353[6] Bhatt P, Pandey K, Yadav P, et al.Investigating the charge carrier transport within the hole-transport material free perovskite solar cell processed in ambient air[J].Solar Energy Materials & Solar Cells, 2015, 140:320-327[7] Kesari Y, Athawale A.Ultrasound assisted bulk synthesis of CH3NH3PbI3 perovskite at room temperature[J].Materials Letters, 2015, 159:87-89[8]Stoumpos C C, ?Malliakas C D, ?Kanatzidis M G.Semiconducting tin and lead iodide perovskites with organic cations: phase transitions,high mobilities,and near-infrared photoluminescent properties[J].Inorganic Chemistry, 2013, 52(15):9019-9038[9]Chen Q, Zhou H, Yang Y.Planar heterojunction perovskite solar cells via vapor-assisted solution process[J].Journal of the American Chemical Society, 2014, 136(2):622-625[10]Dualeh A, Tétreault N, Gr?tzel M.Effect of Annealing Temperature on Film Morphology of Organic-Inorganic Hybrid Pervoskite Solid-State Solar Cells[J].Advanced Functional Materials, 2014, 24(21):3250-3258[11]Azam A, Jawad A, Ahmed A S, et al.Structural,optical and transport properties of Al3+ doped BiFeO3 nanopowder synthesized by solution combustion method[J].Journal of Alloys and Compounds, 2011, 509(6):2909-2913[12]Kim H S, Lee C R, Park N G.Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%[J].Scientific Reports, 2012, 2(591):1-7[13]Walle C G V.Bind lineups and deformation potentials in the model-solid theory[J].Physical Review B: Condensed Matter and Materials Physics, 1989, 39(3):1871-1883[14]Gratzel M.The light and shade of perovskite solar cells[J].Nature Materials, 2014, 13(9):838-842