Abstract：The advantages of SiC particle reinforced aluminum matrix composites and its preparation methods were briefly introduced， including mixing method， infiltration method， spraying method， powder metallurgy method and solid-liquid separation method. The influence of hot deformation parameters on the properties of the composites was discussed. Finally， the developing prospects of aluminum matrix composites prepared by powder metallurgy method were discussed.
[1]Moreno M F, Oliver C J R.Compression creep of PM aluminum matrix composites reinforced with SiC short fibres[J].Mater Sci Eng A, 2006, 418(1-2):172-[2]Y. Sahin.Wear behavior of aluminum alloy and its composites reinforced by SiC Particles using statistical analysis[J].Materials and Design, 2003, 24:95-103[3]吴清仁，温璧璇.材料导热系数和热膨胀系数与温度关系[J].华南理工大学学报, 1996, 24(3):11-15[4]李进军，于家康.增强基复合材料的热膨胀性能[J].陕西科技大学学报, 2007, 25(2):74-77[5]Axen N, Alahelisten A, Jacobson S.Abrasive wear of aluminafibre-reinforced aluminum[J].wear, 1994, 173:95-[6]陈跃，沈百令，等.颗粒增强铝基材料半金属材料干摩擦磨损特性[J].复合材料学报, 2002, 19(3):56-60[7] Ceschini L，Minak G，Morri A.Forging of AA 6061/23vol% Al2O3p composite: Effects on microstructure and tensile properties [J].Mater Sci Eng A, 2009, 513-514:176-[8]Ceschini L，Minak G，Morri A.Forging of AA 216820vol% Al2O3p composite: Effects on microstructure and tensile properties[J].Compos Sci Techn, 2009, 69(11-12):1783-1784[9]冯朝辉，苏海，等.搅拌铸造SiCp/2024复合材料热挤压-轧制变形组织及性能[J].材料导报B, 2012, 26(1):28-33[10]王涛，李晓池，等.无压浸渗法制备碳化硅颗粒增强铝基复合材料工艺研究[J].硅酸盐通报, 2005, 1:101-103[11] Pech-Canul M I，Katz R N ，Makhlouf M M. .Optimum conditions for pressureless infiltration of SiCp performs by aluminum alloys[J].Journal of Materials Processing Technology, 2000, 108:68-77[12]谢盛辉，陈康华，等.用反应压力熔渗法制备高含量SiCp /6013Al 复合材料及其力学性能[J].湖南有色金属, 2003, 19(2):30-33[13]陈兴，严彪，等.喷射沉积法制备TiB2/Al2O3陶瓷颗粒增强铝基复合材料[J].材料导报, 2008, 22:220-223[14]杨滨，王锋，等.喷射沉积成形颗粒增强金属基复合材料制备技术的发展[J].材料导报, 2001, 15(3):4-6[15]Fogagnolo J B，Velasco, F, Robort M H, et al.Effect of mechanical alloying on the morphology,microstructure and properties of aluminum matrix composite powders[J].Mater Sci Eng A, 2003, 342(1-2):131-[16]张维玉，左涛，等.复合材料制备工艺对组织与性能的影响[J].粉末冶金技术, 2004, 22(6):354-[17]樊建中，左涛，等.高能球磨粉末冶金制备工艺对%复合材料性能的影响[J].复合材料学报, 2004, 21(4):93-98[18]樊建中，肖伯律，等.热处理对复合材料强度和塑性的影响[J].中国有色金属学报, 2006, 16(2):228-234[19] 李惠曲，王淑云，等.等温变形参数对15%SiC颗粒增强铝基复合材料组织性能的影响[J].新技术新工艺, 2009, 7:106-108[20]D J. Lloyed..The solidification microstructure of particulate reinforced aluminum/SiC composites[J].Comp. Sci. Technol, 1989, 35:159-179[21]K M. Shoroword, T. Laoui, A.S.M.A. Hasseeb, J. P. Celis, L. Froyen.Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study [J]. Journal of Materials Processing Technology[J].Journal of Materials Processing Technology, 2003, 142:738-743[22]Clyne T W, Withers P J.An introduction to metal matrix composites [J].Cambridge. Cambridge University Press, 1993, 2(4):31-
2017, Vol. 27 
