Abstract：The SiC/6061Al composites containing 35% (volume fraction) SiC were produced by powder metallurgy method. Effects of the microstructure and the interface between the matrix and the reinforcement on the mechanical properties of the composites were studied. Results show that the SiC particles are distributed uniformly in the matrix， and the interface bonding between the matrix and the reinforcement is good. The composite has high density and high tensile strength.
[1]张东生，张建云，李亚红，等.复合材料近净成形制备及性能[J].金属热处理, 2011, 36(1):49-51
[2]李敏，王爱琴，谢敬佩，等.复合材料组织与性能的影响[J].材料热处理学报, 2016, 37(3):18-23
[3]兖利鹏，王爱琴，谢敬佩，等.含量对基复合材料性能的影响[J].粉末冶金工业, 2013, 23(5):30-34
[4]马俊林，钱陈豪，李萍, 等.基复合材料在等径角挤扭变形中的界面原子扩散行为[J].复合材料学报, 2016, 33(2):334-340
[5]柳培, 王爱琴，兖利鹏，等.球磨时间对高粒径比复合粉末形貌及复材料组织和性能的影响[J].粉末冶金材料科学与工程, 2014, 19(4):523-529
[6]沈茹娟，孙超，宋旼，等.混料实际和挤压对增强纯基复合材料显微组织和力学性能的影响[J].粉末冶金材料科学与工程, 2012, 17(5):604-610
[7]OZBEN T, KILICKAP E.Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC[J].Mater Eng Perform, 2008, 198(13):220-225
[8]Shin S, Bae D.Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites[J].Mater Charact, 2013, 83(3):170-177
[9]Etter T, Schulz P, Weber M, et al.Aluminum carbide formation in interpenetrating graphitealuminum composites[J].Mater Sci Eng A, 2007, 448(1-2):1-6
[10]ASGHARZADEH H, SIMCHI A.Supersolidus liquid phase sintering of Al6061SiC metal matrix composites[J].Powder Metall, 2009, 52(1):28-35
[11]孙超，沈茹娟，宋旼.有限元模拟增强基复合材料的力学行为[J].中国有色金属学报, 2012, 22(2):476-484
[12]SONG M.Effect of volume fraction of SiC particles on mechanical properties of SiCAl composites[J].Transactions of Nonferrous Metals Society of China, 2009, 19(6):1400-1404
[13] Zhangwei Wang, Min Song, Chao Sun, et al.Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al-Cu composites[J].Materials Science and Engineering A, 2010, 527(24-25):6537-6542
[14]郝世明，谢敬佩，王 行，等.微米级颗粒对铝基复合材料拉伸性能与强化机制的影响[J].材料热处理学报, 2014, 35(2):13-18
[15]Ribers H, Da Silva R, Suery M, et al.Effect of interfacial oxide layer in Al-SiC particle composites on bond strength and mechanical behavior[J].Materials Science and Technology, 1990, 6(7):621-628
2017, Vol. 27 
