Abstract：The cuprous oxide crystallites were synthesized by chemical precipitation method from copper sulfate, hydrazine hydrate, sodium hydroxide，with polyvinylpyrrolidone (PVP) as the template polymer. Single factor experiments were used to analyse the effects of cuprous oxide particle size and morphology, including the NaOH concentration, reaction temperature, PVP dosage. SEM and XRD were used to characterize the phase, morphology and particle size of the products. The results show that the prepared cuprous oxide crystallites are minimal and uniform spheres with an average size of 30 nm. The optimum preparation conditions are as follows：the concentration of NaOH is 2 mol/L, the reaction temperature is 70 ℃ and the dosage of PVP is 1.6 g/L.
雷 丹， 王玉棉， 王 胜， 张亚丽， 魏志刚. 化学法制备Cu2O及其粒径形貌控制机理研究[J]. , 2014, 24(04): 20-24.
LEI Dan， WANG Yu-mian， WANG Sheng， ZHANG Ya-li， WEI Zhi-gang. Chemical Preparation of Cuprous Oxide and Research on Its Particle Size and Morphology Control Mechanism. , 2014, 24(04): 20-24.
Madiha A. Shoeib, Omar E. Abdelsalam, Monazah G. Khafagi. Synthesis of Cu2O nano crystallites and their adsorption and photocatalysis behavior[J]. Advanced Powder Technology, 2012, 23(3): 298-304.
Yajie Dong, Yadong Li, Cheng Wang, et al. Preparation of Cuprous Oxide Particles of Different Crystallinity [J]. Journal of Colloid and Interface Science, 200l, 243(1): 85-89.
2014, Vol. 24 
