|
|
|
| Study on preparation and properties of silicon carbide particulate reinforced aluminum matrix composites |
| HAO Shi-ming 1,2, XIE Jing-pei 3 |
（1.School of Physics and Engineering, He’nan University of Science and Technology, Luoyang 471023, China
2.Physical Engineering College, Zhengzhou University, Zhengzhou 450001, China
3.School of Materials Science and Engineering, He’nan University of Science and Technology, Luoyang 471023, China） |
|
|
|
|
Abstract To study the effects of hot pressing temperature, milling process parameters and SiCp volume fraction on SiC particle reinforced aluminum composites, the SiCp/6061Al composites were prepared by powder metallurgy routes. The mechanical and physical properties of the composite were tested, and the microstructure and fracture were observed using scanning electron microscope. The results show that 540 ℃ is the suitable hot pressing temperature; with SiCp content increasing, the relative density and thermal expansion coefficient of the composite decrease, and the tensile strength increases firstly and then decreases rapidly.
|
|
Received: 20 January 2014
Published: 16 October 2014
|
|
|
|
| [1] |
郝斌, 段先进, 崔华, 等.金属基复合材料的发展现状及展望[J].材料导报, 2005, 19(7):64-67
|
| [2] |
崔岩.碳化硅颗粒增强铝基复合材料的航空航天应用[J].材料工程, 2002, 6(3):6-7
|
| [3] |
王文明, 潘复生.碳化硅颗粒增强铝基复合材料开发与应用的研究现状[J].兵器材料科学与工程, 2004, 27(3):61-67
|
| [4] |
CLYNE T W, WITHERS P.J. An Introduction to Metal Matrix Composites [M]. Cambridge: Cambridge University Press, 1993, 89-154.
|
| [5] |
杨智勇, 韩建民, 李卫京, 等.颗粒增强铝基复合材料细观损伤的温度效应[J].北京交通大学学报, 2010, 34(1):128-131
|
| [6] |
SHARMA S C.Effect of particles on the coefficient of thermal expansion behavior of the A16061 alloy composites[J].Metal Mater Trans, 2000, 31A(3):773-774
|
| [7] |
罗嗣俊, 陈康华, 祝昌军, 等.热处理对复合材料拉伸变形行为的影响[J].粉末冶金材料科学与工程, 2009, 41(4):157-161
|
|
|
|
2014, Vol. 24 
