|
|
|
| Development and analysis of MlM 17-4PH stainless steel small module gear |
| LI Jie1，YE Dequan1，QIU Yaohong2 |
| （1.Vigor Precision Hardware and Plastic Products Co., Ltd., Dongguan 523000, China; 2. You Need Enterprise
Consulting Co., Ltd., Kunshan 215300, China） |
|
|
|
|
Abstract The use of metal powder injection molding (MIM) technology to produce small metal parts with com‐
plex geometric shapes, especially for transmission parts with similar and repeated features, such as small module
gears, had certain advantages. As for the selection of metal gear materials, stainless steel 17-4PH could be used in‐
stead of MIM technology. The mechanical properties and corrosion resistance of this material are superior to those
of traditional machined gears. In this paper, according to the characteristics of stainless steel 17-4PH, gears were
made by MIM process and heat treated under different conditions (after sintering, H900, H900+annealing). After
quality testing, there is a slight change, which is similar to the results of traditional hot rolled plates. MIM process
could make complex gears, maintain the excellent dimensional accuracy of stainless steel 17-4PH, and improve me‐
chanical properties.
|
|
Received: 06 January 2023
|
|
|
|
|
|
|
2024, Vol. 34 
