|
|
|
| The present research situation and progress of SiC particle reinforced aluminum matrix composites |
| LI Min1,WANG Ai-qin1,2,XIE Jing-pei1,SUN Ya-li1,ZHANG Heng1 |
1. College of Materials Science and Engineering, He’nan University of Science and Technology, Luoyang 471023, China
2. He’nan Province Nonferrous Metal General Technology Collaborative Innovation Center, Luoyang 471023, China |
|
|
|
|
Abstract The main preparation methods of SiC particle reinforced aluminum matrix composites were reviewed, and several of the most commonly used methods were concluded，including powder metallurgy method, stirring casting method and impregnation method, research status of powder metallurgy method was especially discussed. The interface structure types and interface reactions of SiCp/Al was summarized. The main strengthening mechanism of SiCp/Al composites during heat treatment, influencing factors on microstructure and properties of aluminum matrix composites were analyzed according to many research, and the problems existing in the research progress of SiC particle reinforced aluminum matrix composites were proposed.
|
|
Received: 14 October 2014
Published: 17 June 2015
|
|
|
|
| [1]Logsdon W A and Liaw P K.Tensile fracture toughness and fatigue crack growth rate properties of silicon carbide wisker and particulate reinforced aluminum metal matrix composites[J].Eng Fracture Mech, 1986, 24(5):737-751
[2]樊建中, 肖伯律, 徐骏等.复合材料在航空航天领域的应用与发展[J].材料导报, 2007, 21(10):98-101
[3]于化顺.金属基复合材料及其制备技术[M].北京化学工业出版社, 2006:256~257
[4]刘杰, 孙卫和.碳化硅颗粒增强铝基复合材料的制备工艺进展[J].稀有金属与硬质合金, 2008, 36(2):59-62
[5]Woo-Jin Kim, Yeon J H, Lee J C.Super plastic deformation behavior of spray-deposited hype-eutecticAl-25Si alloy[J].Alloys Comp, 2000, 30(8):237-239
[6]樊建中, 石力开.颗粒增强铝基复合材料研究与应用发展[J].宇航材新工艺, 2012, 42(1):1-7
[7]A.Bhaduri,V[J].Gopinathan, P.Ramakrishnan, A.P.Miodownik, Processing and properties of SiC particulate reinforced Al-6.2Zn-2.5Mg-1.7Cu alloy(7010)matrix composites prepared by mechanical alloying, Mater.Sci. Eng., 1996, A(221):94-101
[8]邹利华, 樊建中, 左涛等.粉末冶金%复合材料的高周疲劳性能[J].中国有色金属学报, 2010, 20(10):1955-1961
[9]樊建中, 桑吉梅, 石力开等.颗粒增强铝基复合材料的研制、应用与发展[J].材料导报, 2001, 15(10):55-57
[10]卢健, 高文理, 苏海, 冯朝辉, 陆政.搅拌铸造法制备铝基复合材料的研究[J].铸造设备与工艺, 2009, 4(8):15-17
[11]苏海, 高文理, 张辉等.搅拌铸造SiCp/2024复合材料的研究[C].//中国宇航学会深空探测技术专业委员会第五届年会论文集.2008:226-230
[12]C.G. Kang,SW. Youn. Mechanical properties of particulate reinforced metal matrix composites by electromagnetic and mechanical stirring and reheating process for thixoforming[J].Journal of materials processing technology, 2004, 147(1):10-22
[13]樊建中, 桑吉梅, 石力开等.颗粒增强铝基复合材料的研制、应用与发展[J].材料导报, 2001, 15(10):55-57
[14]叶斌, 何新波, 任淑彬, 曲选辉.无压浸渗法制备高体分比[J].北京科技大学学报, 2006, 28(3):269-273
[15]Alexander E, Christopher S M, Andreas M.Metal Matrix Composites in Industry: An Introduction and a Survey[M].
[16]Kluwer academic publishers[M].2003:375-385
[17]陈建, 潘复生, 刘天模.Al/SiC界面结合机制的研究现状(续)[J].轻金属, 2000, (11):56-58
[18]樊建中, 姚忠凯, 杜善义, 杨改英, 孙继光, 郭宏, 李义春, 张少明, 石力开.制备的-复合材料的界面结构[J].中国有色金属学报, 1998, 8(1):23-26
[19]崔岩, 耿林, 姚忠凯.复合材料的界面优化与控制[J].中国有色金属学报, 1997, 7(4):162-165
[20]郭建, 刘秀波.颗粒加热预处理工艺对复合材料制备的影响[J].材料热处理学报, 2006, 27(1):20-22
[21]王传廷, 马立群, 尹明勇等.氧化处理对复合材料润湿性和界面结合的影响[J].特种铸造及有色合金, 2010, 30(11):1062-1065
[22]孙铭.纳米碳化硅颗粒增强铝基复合材料的制备及性能研究[D].山东理工大学, 2010.
[23]陈剑锋, 武高辉, 孙东立等.金属基复合材料的强化机制[J].航空材料学报, 2002, 22(2):49-53
[24]孙有平, 严红革, 陈振华等.热处理铝基复合材料的组织与性能[J].中国有色金属学报, 2008, 18(5):829-833
[25]谢臻, 樊建中, 肖伯律等.粉末冶金法制备--复合材料的固溶时效行为[J].稀有金属, 2008, 32(4):433-436
[26]柳培, 王爱琴, 郝世明等.基复合材料的界面行为[J].电子显微学报, 2014, 33(4):306-312
[27]Wang L, Hu J, Z J, et a.Fracture behavior of aluminum borate whisker reinforced aluminum alloy 6061 composite[J].Mater Sci Eng., 2008, A(49):350-358
[28]肖伯律, 毕敬, 赵明久等.尺寸对铝基复合材料拉伸性能和断裂机制的影响[J].金属学报, 2002, 38(9):1006-1008
[29]田晓风, 肖伯律, 樊建中, 万志永, 左涛, 张维玉.纳米颗粒增强铝基复合材料的力学性能研究[J].稀有金属, 2005, 29(4):521-525
[30]樊建中, 左涛, 肖伯律等.高能球磨粉末冶金制备工艺对%复合材料性能的影响[J].复合材料学报, 2004, 21(4):92-98
[31]兖利鹏, 王爱琴, 谢敬佩等.含量对 基复合材料性能的影响[J].粉末冶金工业, 2013, 23(5):30-34
[32]任淑彬, 叶斌, 曲选辉等.复杂形状复合材料零件的制备与性能[J].中国有色金属学报, 2005, 15(11):1722-1726
|
|
|
|
2015, Vol. 25 
