|
|
|
| CAD of injection mold for elbow part |
| LI Bin |
| School of Marine Engineering, Guangzhou Maritime Institute, Guangzhou 510725, China |
|
|
|
|
Abstract Combined cavities and core-pulling mechanism were used for the elbow parts forming, which has high automation degree, thus the production efficiency was improved. The software of Moldflow was used to simulating the injection process and the working process of mold. The results show that the mold structure is reasonable, which can meet the technologic requirements of elbow parts.
|
|
Received: 09 September 2014
Published: 29 July 2015
|
|
|
|
| [1]《塑料工程手册》编委会.塑料工程手册〔M〕. 北京：机械工业出版社，2000.[J].塑料工程手册编委会, , :-
[2]詹友刚.Pro/ENGINEER 英文野火版教程－专用模块〔M〕. 北京：清华大学出版社，2004
[3]《塑料模设计手册》编写组.塑料模设计手册〔M〕. 北京：机械工业出版社，2002
[4]王文广.塑料注射模具没计技巧与实例〔M〕. 北京：化学工业出版社，2004.
|
|
|
|
2015, Vol. 25 
