| [1]Moreno M F, Oliver C J R.Compression creep of PM aluminum matrix composites reinforced with SiC short fibres[J].Mater Sci Eng A, 2006, 418(1-2):172-[2]Y. Sahin.Wear behavior of aluminum alloy and its composites reinforced by SiC Particles using statistical analysis[J].Materials and Design, 2003, 24:95-103[3]吴清仁，温璧璇.材料导热系数和热膨胀系数与温度关系[J].华南理工大学学报, 1996, 24(3):11-15[4]李进军，于家康.增强基复合材料的热膨胀性能[J].陕西科技大学学报, 2007, 25(2):74-77[5]Axen N, Alahelisten A, Jacobson S.Abrasive wear of aluminafibre-reinforced aluminum[J].wear, 1994, 173:95-[6]陈跃，沈百令，等.颗粒增强铝基材料半金属材料干摩擦磨损特性[J].复合材料学报, 2002, 19(3):56-60[7] Ceschini L，Minak G，Morri A.Forging of AA 6061/23vol% Al2O3p composite: Effects on microstructure and tensile properties [J].Mater Sci Eng A, 2009, 513-514:176-[8]Ceschini L，Minak G，Morri A.Forging of AA 216820vol% Al2O3p composite: Effects on microstructure and tensile properties[J].Compos Sci Techn, 2009, 69(11-12):1783-1784[9]冯朝辉，苏海，等.搅拌铸造SiCp/2024复合材料热挤压-轧制变形组织及性能[J].材料导报B, 2012, 26(1):28-33[10]王涛，李晓池，等.无压浸渗法制备碳化硅颗粒增强铝基复合材料工艺研究[J].硅酸盐通报, 2005, 1:101-103[11] Pech-Canul M I，Katz R N ，Makhlouf M M. .Optimum conditions for pressureless infiltration of SiCp performs by aluminum alloys[J].Journal of Materials Processing Technology, 2000, 108:68-77[12]谢盛辉，陈康华，等.用反应压力熔渗法制备高含量SiCp /6013Al 复合材料及其力学性能[J].湖南有色金属, 2003, 19(2):30-33[13]陈兴，严彪，等.喷射沉积法制备TiB2/Al2O3陶瓷颗粒增强铝基复合材料[J].材料导报, 2008, 22:220-223[14]杨滨，王锋，等.喷射沉积成形颗粒增强金属基复合材料制备技术的发展[J].材料导报, 2001, 15(3):4-6[15]Fogagnolo J B，Velasco, F, Robort M H, et al.Effect of mechanical alloying on the morphology,microstructure and properties of aluminum matrix composite powders[J].Mater Sci Eng A, 2003, 342(1-2):131-[16]张维玉，左涛，等.复合材料制备工艺对组织与性能的影响[J].粉末冶金技术, 2004, 22(6):354-[17]樊建中，左涛，等.高能球磨粉末冶金制备工艺对%复合材料性能的影响[J].复合材料学报, 2004, 21(4):93-98[18]樊建中，肖伯律，等.热处理对复合材料强度和塑性的影响[J].中国有色金属学报, 2006, 16(2):228-234[19] 李惠曲，王淑云，等.等温变形参数对15%SiC颗粒增强铝基复合材料组织性能的影响[J].新技术新工艺, 2009, 7:106-108[20]D J. Lloyed..The solidification microstructure of particulate reinforced aluminum/SiC composites[J].Comp. Sci. Technol, 1989, 35:159-179[21]K M. Shoroword, T. Laoui, A.S.M.A. Hasseeb, J. P. Celis, L. Froyen.Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study [J]. Journal of Materials Processing Technology[J].Journal of Materials Processing Technology, 2003, 142:738-743[22]Clyne T W, Withers P J.An introduction to metal matrix composites [J].Cambridge. Cambridge University Press, 1993, 2(4):31- |
2017, Vol. 27 
