|
|
|
| Numerical simulation of the Fe-based powder metallurgy hydraulic motors valve plate compaction |
| SHAO Rui，ZUO Peng-jun，ZHANG Jiang-xue，YANG Cong-bin，WANG Liu-yong |
| Shaanxi Provincial Machinery Research Institute， Xianyang 712000， China |
|
|
|
|
Abstract Forming process of Fe-based powder metallurgy hydraulic motors valve plate was simulated with the numerical simulation software DEFORM-3D. The local and overall valve plate density distribution was studied under the condition of five different forming process parameters. The basic reason of non-uniform density distribution in the outer step and inner step of the valve plate and the whole was also analyzed. The better forming process parameters were obtained， and the production process parameters were verified. It has important significance to improve the rationality of the process design for the similar powder metallurgy parts.
|
|
Received: 09 May 2016
Published: 18 April 2017
|
|
|
|
| [1] 左鹏军．摆线液压马达粉末冶金阀板制造及成形工艺研究［D］．西安交通大学，2013[2] 屠挺生，林大为．金属粉末烧结材料泊松比模型的探讨 ［J］．金属成形工艺，2001-2[3] 宋平．铁基粉末压制成形数值模拟研究［D］．合肥工业大学，2008[4] 王德广，吴玉程，焦明华等．压制方式对粉末冶金制品性能影响的有限元模拟［J］．粉末冶金技术，2008-4[5] 赵伟斌．金属粉末温压成形的力学建模和数值模拟［D］．华南理工大学，2006[6] 郭彪，魏晓伟，熬进清，肖贤通．粉末冶金皮带轮模压致密化成型的数值模拟［J］．西华大学学报（自然科学版）2015-6 |
|
|
|
2017, Vol. 27 
