[1]吴旭,郭志猛. 铝合金表面爆炸喷涂WC-17Co涂层性能的研究[J].粉末冶金工业, 2013, 05:22-25[2]刘建金,崔照雯,李斌. 铜基体上超音速火焰喷涂WC-12Co涂层的摩擦磨损性能[J].粉末冶金技术, 2014, 03:190-194[3]Aw P K, Tan B H.Study of microstructure,phase and microhardness distribution of HVOF sprayed multi-modal structured and conventional WC–17Co coatings[J].Journal of Materials Processing Technology, 2006, 174(1-3):305-311[4]Ding Z, Wei C, Qun W.Resistance of cavitation erosion of multimodal WC-12Co coatings sprayed by HVOF[J].Transactions of Nonferrous Metals Society of China, 2011, 21(10):2231-2236[5] 马宁,程振雄,乌焕涛.粉末结构对HVOF喷涂WC-Co涂层组织性能的影响[J].稀有金属材料与工程, 2015, 12:3219-3223[6]丁彰雄,陈伟,王群. HVOF制备的多峰WC-12Co涂层摩擦磨损特性[J].摩擦学学报, 2011, 05:425-430[7] 高培虎,杨冠军,李毅功.双尺度结构WC-12Co涂层的冷喷涂制备[J].材料研究与应用, 2009, 01:44-48[8]Zhu Y, Yukimura K, Ding C, et al.Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying[J].Thin solid films, 2001, 388(1):277-282[9]Yang Q, Senda T, Ohmori A.Effect of carbide grain size on microstructure and sliding wear behavior of HVOF-sprayed WC–12% Co coatings[J].Wear, 2003, 254(1-2):23-34[10]Shipway P H, Mccartney D G, Sudaprasert T.Sliding wear behaviour of conventional and nanostructured HVOF sprayed WC–Co coatings[J].Wear, 2005, 259(7-12):820-827[11]Watanabe M, Owada A, Kuroda S, et al.Effect of WC size on interface fracture toughness of WC-Co HVOF sprayed coatings[J].Surface and Coatings Technology, 2006, 201(3-4):619-627[12]Wang Q, Chen Z H, Ding Z X.Performance of abrasive wear of WC-12Co coatings sprayed by HVOF[J].Tribology International, 2009, 42(7):1046-1051[13]Wang Q, Chen Z, Li L, et al.The parameters optimization and abrasion wear mechanism of liquid fuel HVOF sprayed bimodal WC–12Co coating[J].Surface and Coatings Technology, 2012, 206(8-9):2233-2241[14]Chivavibul P, Watanabe M, Kuroda S, et al.Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC–Co coatings[J].Surface and Coatings Technology, 2007, 202(3):509-521[15]Wang D, Zhang B, Jia C, et al.Microstructure and tribological properties of plasma-sprayed WC-17 Co coatings with different carbide grain size distribution[J].Journal of the Japan Society of Powder and Powder Metallurgy, 2016, 63(7):688-696[16]Qiao Y, Fischer T E, Dent A.The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures[J].Surface and Coatings Technology, 2003, 172(1):24-41[17] Kumari K, Anand K, Bellacci M, et al.Effect of microstructure on abrasive wear behavior of thermally sprayed WC-10Co-4Cr coatings[J].Wear, 2010, 11-12(268):1309-1319[18] Evans A G, Wilshaw T R.Quasi-static solid particle damage in brittle solids-I. Observations analysis and implications[J].Acta Metallurgica, 1976, 10(24):939-956[19] Lekatou A, Sioulas D, Karantzalis A E, et al.A comparative study on the microstructure and surface property evaluation of coatings produced from nanostructured and conventional WC-Co powders HVOF-sprayed on Al7075[J].Surface and Coatings Technology, 2015, (276):539-556[20] Yuan J, Ma C, Yang S, et al.Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats' interfaces[J].[J]. Surface and Coatings Technology. 2016, 285: 17-23., 2016, (285):17-23[21] Liu S L, Zheng X P, Geng G Q.Influence of nano-WC-12Co powder addition in WC-10Co-4Cr AC-HVAF sprayed coatings on wear and erosion behaviour[J].Wear, 2010, 5-6(269):362-367[22] Verdon C, Karimi A, Martin J L.A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures[J].Materials Science and Engineering: A, 1988, 1-2(246):11-24[23] Hong S, Wu Y P, Gao W W, et al.Microstructural characterisation and microhardness distribution of HVOF sprayed WC–10Co–4Cr coating[J].Surface Engineering, 2014, 1(30):53-58[24] He J, Schoenung J M.A review on nanostructured WC–Co coatings[J].Surface and Coatings Technology, 2002, 1(157):72-79 |