| [1]张东生，张建云，李亚红，等.复合材料近净成形制备及性能[J].金属热处理, 2011, 36(1):49-51
[2]李敏，王爱琴，谢敬佩，等.复合材料组织与性能的影响[J].材料热处理学报, 2016, 37(3):18-23
[3]兖利鹏，王爱琴，谢敬佩，等.含量对基复合材料性能的影响[J].粉末冶金工业, 2013, 23(5):30-34
[4]马俊林，钱陈豪，李萍, 等.基复合材料在等径角挤扭变形中的界面原子扩散行为[J].复合材料学报, 2016, 33(2):334-340
[5]柳培, 王爱琴，兖利鹏，等.球磨时间对高粒径比复合粉末形貌及复材料组织和性能的影响[J].粉末冶金材料科学与工程, 2014, 19(4):523-529
[6]沈茹娟，孙超，宋旼，等.混料实际和挤压对增强纯基复合材料显微组织和力学性能的影响[J].粉末冶金材料科学与工程, 2012, 17(5):604-610
[7]OZBEN T, KILICKAP E.Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC[J].Mater Eng Perform, 2008, 198(13):220-225
[8]Shin S, Bae D.Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites[J].Mater Charact, 2013, 83(3):170-177
[9]Etter T, Schulz P, Weber M, et al.Aluminum carbide formation in interpenetrating graphitealuminum composites[J].Mater Sci Eng A, 2007, 448(1-2):1-6
[10]ASGHARZADEH H, SIMCHI A.Supersolidus liquid phase sintering of Al6061SiC metal matrix composites[J].Powder Metall, 2009, 52(1):28-35
[11]孙超，沈茹娟，宋旼.有限元模拟增强基复合材料的力学行为[J].中国有色金属学报, 2012, 22(2):476-484
[12]SONG M.Effect of volume fraction of SiC particles on mechanical properties of SiCAl composites[J].Transactions of Nonferrous Metals Society of China, 2009, 19(6):1400-1404
[13] Zhangwei Wang, Min Song, Chao Sun, et al.Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al-Cu composites[J].Materials Science and Engineering A, 2010, 527(24-25):6537-6542
[14]郝世明，谢敬佩，王 行，等.微米级颗粒对铝基复合材料拉伸性能与强化机制的影响[J].材料热处理学报, 2014, 35(2):13-18
[15]Ribers H, Da Silva R, Suery M, et al.Effect of interfacial oxide layer in Al-SiC particle composites on bond strength and mechanical behavior[J].Materials Science and Technology, 1990, 6(7):621-628
|
2017, Vol. 27 
