|
|
|
| Tribological properties analysis of copper-based bimetallic bearing material containing FeS |
| XUE Lu，YIN Yan-guo，ZHANG Guo-tao，LI Ji-ning |
| （Institute of Tribology，Hefei University of Technology，Hefei 230009，China） |
|
|
|
|
Abstract The Cu-based bimetallic bearing material containing FeS was prepared by the traditional powder metallurgy method and compared with the Cu-based bimetallic bearing material without FeS. The friction and wear properties of the Cu-based bimetallic bearing material were tested on HDM-20 end machine，and the wear marks were observed through the optical microscope. The results show that under the condition of sufficient lubrication，the antifriction properties and bearing capacity of copper-based bearing material with FeS are better than those without FeS. Under the condition of dry friction，the antifriction property of the copper-based bearing material with FeS is better than that without FeS.
|
|
Received: 10 May 2016
Published: 10 August 2017
|
|
|
|
|
|
|
2017, Vol. 27 
