烧结镍基高温合金丝网多孔材料的抗氧化性能研究

doi:10.13228/j.boyuan.issn1006-6543.20170022

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The oxidation kinetics curve and oxidation rate of sintered nickel-based superalloy mesh porous materials with two different sizes and dense monofilament samples at 900 ℃ were tested through static weight gain method. The surface area of the porous small sample was tested through the 9410 automatic mercury porosimeter， and was also calculated through the permeability coefficient， and the oxidation rate of the porous small sample was corrected accordingly. The morphology and oxide composition of the porous samples were observed by SEM， EDS and XRD. The results show that the oxidation rate of the large and small porous samples is about 7 times that of monofilament sample after 100 h oxidation experiment. The oxidation rate of the modified small porous sample is much smaller than that before being corrected， which is also smaller than the oxidation rate of the monofilament sample. The surface oxide of the porous samples is spherical and distributed uniformly， and its composition is mainly NiCr2O4.

Received: 09 March 2017 Published: 14 November 2017

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GU Hu
	YANG Jun-Jun
	WANG Hao
	HUANG Zuo-Qin
	WANG Fan
	ZHAO Jing-Hui

Cite this article:

GU Hu,YANG Jun-Jun,WANG Hao, et al. Study on oxidation resistance of sintered nickel-based superalloy mesh porous materials[J]. , 2017, 27(05): 41-46.

URL:

http://edit.chinamet.cn/Jweb_fmyjgy/EN/10.13228/j.boyuan.issn1006-6543.20170022 OR http://edit.chinamet.cn/Jweb_fmyjgy/EN/Y2017/V27/I05/41