陶瓷颗粒增强铝基复合材料的研究进展

doi:10.13228/j.boyuan.issn1006-6543.20160105

Abstract
Figure/Table
References
Related Citation (14)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract There are many advantages for particle reinforced aluminum matrix composites （PRAMCs）， such as high specific strength， high specific stiffness， high elastic modulus， good wear-resistance， good dimensional stability and low cost. The selection principle， characteristics and the role of the reinforced particles in the metal matrix were summarized. The development status， strengthening mechanism and common preparation methods of several kinds of typical particle reinforced aluminum matrix composites were introduced. The advantages and application scope of typical preparation process， the research and application status in the related fields at home and abroad were listed. Finally， it was pointed out that the particle reinforced aluminum matrix composites was one of the important directions in current research and development， which had broad application prospects.

Key words： Aluminum matrix composites particle reinforced SiCp process technology

Received: 18 September 2016 Published: 27 February 2018

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HAO Shi-Ming
	MAO Jian-Wei
	XIE Jing-Pei

Cite this article:

HAO Shi-Ming,MAO Jian-Wei,XIE Jing-Pei. Research and development of ceramic particle reinforced aluminum matrix composites[J]. , 2018, 28(01): 56-62.

URL:

http://edit.chinamet.cn/Jweb_fmyjgy/EN/10.13228/j.boyuan.issn1006-6543.20160105 OR http://edit.chinamet.cn/Jweb_fmyjgy/EN/Y2018/V28/I01/56

1. 陈秋玲,孙艳.颗粒增强铝基复合材料的研究[J].中国资源综合利用,2003,(6):31-33.
2. J.N.Hall, J. W.Junes. Materials Science＆ Engineering, Vo1.183, No.1-2, June 15, 1994.
3. S. F.Corbin,D.S.Wilkinson. Acta Metal. Vo1.42, No.4, April 1994, P1311-1318.
4. 付雪莹, 张洪, 席慧智.颗粒增强铸造铝合金的研究现状[J]. 轻金属, 2004(7): 53-57.
5. Lloyd D J. Particle reinforced aluminum and magnesium matrix composites [J]. International Materials Reviews, 1994, 39(1): 1-7.
6. I. A. Ibrahim, F. A. Mohamed and E. J. Lavernia, Review of Particle reinforced metal matrix composites. Journal of Materials Science, 1991, 26(5): 1137-1156.
7. 李明伟.SiC颗粒增强铝基复合材料微观结构及力学性能的研究. 北京:北京交通大学, 2004.
8. 陈赛克. 陶瓷颗粒强化金属基复合材料. 世界机械工业. 1989, 7: 41.
9. Shoroword K M, Laoui T, etal. Mater. Proc. Tech., 2003, 142: 738.
10. 周曦亚. Al2O3/Al复合材料氧化生长的动力学研究[J]. 复合材料学报, 1997, 14(3): 9.
11. Lloyd D, J Jin I, Weatherly G C. Sci Metal, 1994, (34): 393.
12. 周曼娜. Al2O3颗粒增强纯铝基复合材料的研究 [J].复合材料学报, 1993, 10(3): 51-56.
13. 孟繁琴，程晓民，胡斌等. 原位反应法制备Al2O3/Al基复合材料的研究[J]. 特种铸造及有色合金. 2004, (4): 63-64.
14. 张敬强, 荣守范. 氧化铝陶瓷增韧的研究现状[J]. 铸造设备研究, 2006, 2: 40-44.
15. 钟长荣，毕松，苏勋家等. A12O3陶瓷自增韧研究进展[J]. 粉末冶金材料科学与工程，2007, 12(4): 193-196.
16. 郭珉, 朱秀荣, 王荣. 颗粒增强铝基复合材料断裂韧度研究[J]. 特种铸造及有色合金. 2006, 6:32-33.
17. 李爱菊,尹衍升,龚红宇.TiN、AlN弥散相强韧化A12O3基复合材料的工艺研究[J].材料科学与工程学报,2003, 21(4): 524-527.
18. 郭建,王西科,沈宁福.常规铸造工艺条件下SiCp/Al-Si复合材料中的界面反应[J].材料工程,2003,12: 18-22.
19. 李斌，许庆彦. Al-Si/SiCp铝基复合材料组织模拟及颗粒分布均匀性定量预测[J]. 机械工程学报，2007，43(1)：202-213.
20. Zaklina Gnjidic, Dusan Bozic, Mirjana Mitkov. Mater Chara, 2001, 47: 129.
21. 林君山，沙民，沈文荣等. 铸造SiCp/2024复合材料微观结构与强化机制的研究[J]. 金属学报，1993，29(9)：B417-423.
22. 郭成,程羽,尚春阳等.SiC颗粒增强铝合金基复合材料断裂与强化机理[J].复合材料学报,2001,18(4): 54-57.
23. 李侠，陈康华，黄大为. 增强颗粒对颗粒增强铝基复合材料强度的影响[J]. 铝加工，2006，167(2)：9-13.
24. 宋文杰, 钟晖. TiB2制备方法及其研究新进展[J]. 稀有金属与硬质合金, 2005, 33(2):47-52.
25. 马强，张敏刚，柴跃生. 原位TiB2/A1复合材料制备工艺研究[J]. 太原科技大学学报, 2006, 27(1):6-10.
26. 龙祥愿, 章爱生. 原位反应制备细颗粒TiB2增强铝基复合材料研究[J].轻金属, 2006, 6:57-60.
27. 张亦杰,江盛玲,马乃恒等. 原位自生A356/TiB2复合材料的组织与性能[J].上海交通大学学报,2007,41(2):
328-331.
28. Michael D. Skibo, Luecadia, David M. Schuster.etc. US Patent 4786467, 1998.
29. 张建平，毛建伟，乐永康. 中国专利. 200710190251.0, 2007.
30. 乐永康，张建平，陈东等. 原位反应合成TiB2的生长行为[J]. 特种铸造及有色合金，2008，28(2):102-105
31. 费良军,朱秀荣,童文俊等.颗粒增强铝基复合材料废料回收的试验研究[J].复合材料学报,2001,18(1): 67-70