五轴工具磨床磨削硬质合金刀具的锯齿量超差工艺改进研究

doi:10.13228/j.boyuan.issn1006-6543.20200081

Download: PDF (2651 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to solve the problem of saw tooth limitation out of tolerance in the grinding process of solid carbide tools，the experiments were carried out from the angle of grinding wheel size，feed speed，process sequence and tool path density. The results show that a lower grinding wheel size，a lower feed speed within a certain range， a reasonable sequence of work steps，and a higher tool path density can effectively improve the saw tooth limit out of tolerance and obtain a good overall quality of cemented carbide cutting edge.

Key words： five axis tool grinder saw tooth limit process improvement integral carbide tool

Received: 29 March 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIANG Xiangyan
	LIU Aiqiang
	XIE Peng

Cite this article:

JIANG Xiangyan,LIU Aiqiang,XIE Peng. Process improvement of saw tooth limitation of grinding integral carbide tool in five axis tool grinding machine[J]. Powder Metallurgy Industry, 2020, 30(06): 96-101.

URL:

http://edit.chinamet.cn/Jweb_fmyjgy/EN/10.13228/j.boyuan.issn1006-6543.20200081 OR http://edit.chinamet.cn/Jweb_fmyjgy/EN/Y2020/V30/I06/96

No Similar of article