Abstract：Bulk amorphous rods of Fe74Al4Sn2P10Si4B4C2 alloy with diameter of 1.0mm, 1.5mm and 2.0mm were prepared by water-cooled copper mold method. The magnetic properties of the rods were measured by vibrating sample magnetometer, which showed high saturation magnetic induction and low coercive force. Bulk amorphous tube (5 mm×7 mm×15 mm) of Fe74Al4Sn2P10Si4B4C2 alloy was also prepared by water-cooled copper mold method, which showed similar thermal properties with bulk amorphous rods. It was indicated that Fe74Al4Sn2P10Si4B4C2 alloy had good castability.
H.W.Kui,DTurnbull. Melting of Ni40Pd40P20 glass[J].Appl. Phys. Lett., 1985, 47(8):796-797
[3]
N.Nishiyama,AInoue. Glass transition behavior and viscous flow working of Pd40Cu30Ni10P20 amorphous alloy[J].Mater. Trans, JIM., 1999, 40(1):64-71
[4]
A.Inoue,MKohinata,A. Tsai,et al. Mg-Ni-La amorphous alloys with a wide supercooled liquid region[J].Mater. Trans, JIM, 1989, 30(5):378-381
[6]
C.Fan, A. Inoue. Shear sliding-off fracture of bulk amorphous Zr-based alloys containing nanoscale compound particles[J]. Mater. Trans, JIM. 1999, 40(12):1376-1381
[7]
A.Inoue,HYamaguchi,T. Zhang,et al. Al-La-Cu amorphous alloys with a wide supercooled liquid region[J].Mater. Trans, JIM., 1990, 31(2):104-109
[8]
A.Inoue, Y. S. Gook. Fe-base ferromagnetic glassy alloys with wide supercoooled liquid region[J]. Mater. Trans., JIM, 1995, 36:1180-1183
[11]
A.Inoue, A. Takeuchi, T. Zhang. Ferromagnetic bulk amorphous alloys[J]. Metall. Mater. Trans., 1998, A29:1779-1793
[12]
A.Inoue, T. Zhang, T. Itoi. New Fe-Co-Ni-Zr-B amorphous alloys with wide supercooled liquid region and good soft magnetic properties[J]. Mater. Trans., JIM., 1997, 38:359-362
[13]
A.Inoue, M. Koshiba, T. Zhang, et al. Wide supercooled liquid region and soft magnetic properties of Fe56Co7Ni7Zr0-10Nb(or Ta)0-10B20 amorphous alloys[J]. J. Appl. Phys., 1998, :1967-1974
[15]
W.Zhang, A. Inoue. Thermal and magnetic properties of Fe-Co-Ln-B(Ln=Nd, Sm, Tb, Dy) with high magnetostriction[J]. Mater. Trans, JIM., 1999, 40:78-81
[16]
A.Inoue,ATakeuchi,B.L.Shen. Formation and functional properties of Fe-based bulk glassy alloys[J].Mater. Trans., JIM., 2001, 42(6):970-978
H.W.Kui,AL. Greer,D. Turnbull. Formation of bulk metallic glass by fluxing[J].Appl. Phys. Lett., 1984, 45(6):615-616
[5]
N.H.Pryds,MEldrup,M. Ohnuma,et al. Preparation and properties of Mg-Cu-Y-Al bulk amorphous alloys[J].Mater. Trans, JIM., 2000, 41(11):1435-1442
[9]
A.Inoue, Y. Shinohara, J. S. Gook. Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting[J]. Mater. Trans., JIM, 1995, 36:1427-1433
[10]
A.Inoue,AMurakami,T. Zhang.,et al. Thermal stability and magnetic properties of bulk amorphous Fe-Al-Ga-P-C-B-Si alloys[J].Mater. Trans., JIM., 1997, 38(189):196-
[14]
A.Inoue, W. Zhang. New Fe-based amorphous alloys with large magnetostriction and wide supercooled liquid region before crystallization[J]. J. Appl. Phys., 1999, 85:4491-4493
2014, Vol. 21 
