Abstract：Taking the SRVS-50G vacuum sintering furnace as the research object, based on the Fluent finite element analysis software, the temperature field and flow field of the sintered NdFeB vacuum sintering furnace were simulated and analyzed during the gas quenching and cooling process. This article studies the effects of cooling inlet wind speed and outlet quantity on the cooling uniformity and cooling efficiency of vacuum sintering furnace. The results show that increasing the inlet air speed can improve cooling efficiency, but the cooling uniformity is reduced. The appropriate inlet wind speed should be selected according to the specific product temperature uniformity requirements. In terms of the number of air outlets, the number of air outlets is 4, which is the best in terms of cooling uniformity and cooling efficiency.
[1]周寿增,高学绪.烧结钕铁硼永磁材料产业现状与挑战[J].新材料产业,2011(05):8-15.[2]张英建,李军,马晓辉,房成,李玉钏.中国钕铁硼市场发展现状及未来发展趋势分析[J].金属功能材料,2022,29(01):67-77+84.[3]胡伯平.稀土永磁材料的现状与发展趋势[J].磁性材料及器件,2014,45(02):66-77+80.[4]周军勇,俞能君,金向阳,单杰锋,张朋越,张志高,葛洪良.基于ANSYS的真空热处理炉的温度场分析[J/OL].热加工工艺:1-7[2023-05-21].[5]贺瑞军,冯润华,韩啸,孔令利.基于Fluent的真空固溶热处理炉内温度场流体场分析[J].金属热处理,2022,47(12):252-257.[6]邵宇嵩,赵新颖,谢元华,杜雪峰,孙宝玉,段永利,杨双,齐丽君.钕铁硼时效处理真空炉结构与料盒摆放优化研究[J].辽宁化工,2021,50(12):1748-1752[7]孔令利,贺瑞军,张善庆.真空正压气淬炉气淬冷却测试[J].热加工工艺,2021,50(02)[8]Schneider G E,Raw M J,Control volume finite-element method for transfer and fluid flow using colocated variables-1.Computational procedure [J].Numerical Heat Transfer,Part A applications,1987,11(4):363-390[9]Launder B E,Spalding D B,The numerical computation of turbulent flow[M]//Numerical prediction of flow,heat transfer,turbulence and combustion.Pergamon,183;96-116[10]Eymard R,Gallouet T,Herbin R.Finite volume methods[J].Handbook of Numerical Analysis,2000,7;713-1018[11]王明伟. 高温合金和钛合金真空热处理及热胀形过程数值模拟[D].大连理工大学,2007.[12]曹润辰,王婧,王琦,顾剑锋.真空高压气淬炉流场和温度场的数值模拟[J].热处理,2014,29(01):54-58.
2023, Vol. 