|
|
Research and practice on cooling process of DP600 by horizontal furnace hot dip galvanizing line |
|
|
Abstract Abstract: In this paper, through thermal simulation experiments, the dynamic CCT curve is drawn, the cooling rate, phase transformation time requirement and phase transformation temperature range of DP600 in production are defined. According to the dynamic CCT curve, combined with the heating, cooling and post-coating cooling capacity of the horizontal annealing furnace in the hot dip galvanizing line, the DP600 dual phase steel is successfully developed through the results verification of thermal simulation experiment.
|
Received: 17 July 2023
Published: 22 February 2024
|
|
|
|
[1]焦书军,张红,郑建平.冷轧热镀锌双相钢成分设计模型化的研究[J].宝钢技术.2003,(5):43.[2]尹显东,张立芬,黄大鹏.等.新型实用热镀锌双相钢(RDP600)的试验研究[J].汽车工艺与材料, 2006,24(6):11.[3]窦婷婷,康永林,于浩,等.连续镀锌DP600双相钢组织与性能研究[J].材料工程,2006,(增刊1):120.[4]江海涛,唐荻,米振莉.汽车用先进高强度钢板的开发及应用进展[J].钢铁研究学报,2007(8):1. |
|
|
|