Research status on titanium alloy and titanium powder for 3D printing
LI An1，LUO Cheng1，YANG Bowen2，ZHANG Peng1，ZHAO Xiaohao1，LAI Yunjin1
（1. Sino-Euro Materials Technologies of Xi′an, Xi′an 710018, China; 2. Aerospace Research Institute of Materi‐
als & Processing Technology, Beijing 100076, China）
Abstract：3D printing is a new type of manufacturing technology, which is widely applied in the field of aero‐
space, medical treatment, automobile, ships.Titanium alloy is an important part of metal 3D printing system due to
its excellent properties such as light weight, high specific strength, good corrosion resistance and excellent biocom‐
patibility. The performance requirements of titanium materials and main preparation methods of powder of 3D
printing were briefly described. The characteristic of GA and PREP preparation technique were compared, and the
reason for the difference of GA and PREP preparation technique were explained emphatically. At last, research
directions and application prospects were expounded.
李 安，罗 成，杨博文，张 鹏，赵霄昊，赖运金. 3D打印用钛合金及粉末制备技术研究进展[J]. 粉末冶金工业, 2024, 34(02): 127-133.
LI An，LUO Cheng，YANG Bowen，ZHANG Peng，ZHAO Xiaohao，LAI Yunjin. Research status on titanium alloy and titanium powder for 3D printing. Powder Metallurgy Industry, 2024, 34(02): 127-133.
2024, Vol. 34 
