Abstract：Multi-principal element high-entropy alloy is a new multi alloy which based on the design idea of “multiple high tangle degree”， with high strength， high hardness， good corrosion resistance， high wear resistance and good high temperature thermal stability， etc. The definition and phase generation theory were presented. In addition， the progress in the field of high-entropy alloy in recent years was also summarized.
李文虎，艾桃桃. 多主元高熵合金成相研究进展[J]. , 2016, 26(01): 64-67.
LI Wen-hu，AI Tao-tao. Research development on the phase generation of multi-principal element high-entropy alloys. , 2016, 26(01): 64-67.
[1] Yeh J W, Chen S K, Lin S J, etal. Nanostructured high entropyalloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Adv Eng Mater, 2004, 6(5): 299-303.[2] 叶均蔚, 陈瑞凯, 刘树均. 高熵合金的发展概况[J]. 工业材料杂志, 2005, 22(4): 71-75．[3] Hsu C Y, Yeh J W, Chen S K, et al. Wear resistance and high temperature compression strength of fcc CuCoNiCrAl0.5Fe alloy with boron addition[J]. Metall Mater Trans A, 2004, (35):1465[4]范啟超. AlFeCrNiCoCu系高熵合金及其复合材料组织及性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2011.[5] K.-Y. Tsai, M.-H. Tsai, J.-W. Yeh. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys[J]. Acta Materialia, 2013, (61): 4887-4897.[6] 徐祖耀, 李麟. 材料热力学[M]. 北京: 科学出版社, 2005.[7] 张勇, 周云军, 陈国良. 快速发展中的高熵溶体合金[J]. 物理学和高新技术, 2008, 37(8): 600-605.[8] L.C. Tsao, C.S. Chen, C.P. Chu. Age hardening reaction of the Al0.3CrFe1.5MnNi0.5 high entropy alloy[J]. Materials and Design, 2012, (36): 854-858.[9] Weiping Chen, Zhiqiang Fu, Sicong Fang, et al. Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy[J]. Materials and Design, 2013, (51): 854-860.[10] S. Varalakshmi, M. Kamaraj, B.S. Murty. Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying[J]. Materials Science and E ngineering A, 2010, (527): 1027-1030.[11] S. Praveen, B.S. Murty, Ravi S. Kottada. Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys[J]. Materials Science and Engineering A, 2012, (534): 83-89.[12] Zhiqiang Fu, Weiping Chen, Huaqiang Xiao, et al. Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique[J]. Materials and Design, 2013, (44): 535-539.[13] A. Takeuchia, N. Chena, T. Wadab, et al. Alloy Design for High-Entropy Bulk Glassy Alloys[J]. Procedia Engineering, 2012 (36): 226-234.[14] LEE C P, CHANG C C, CHEN Y Y, et al. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments[J]. Corrosion Science, 2008, (50): 2053-2060.[15] A. Manzoni, H. Daoud, S. Mondal c, et al. Investigation of phases in Al23Co15Cr23Cu8Fe15Ni16 and Al8Co17Cr17Cu8Fe17Ni33 high entropy alloys and comparison with equilibrium phases predicted by Thermo-Calc[J]. Journal of alloys and Compounds, 2013, (552): 430-436.[16] Yang X, Zhang Y. Prediction of high-entropy stabilized solid-solution in multi-component alloys[J]. Materials Chemistry and Physics, 2012, 132(2): 233-238.[17] ZHOU YJ , ZHANG Y, WANG F J , et al . Effect of Cu addition on the microstructure and mechanical properties of AlCoCrFeNiTi0.5 solid-solution alloy [ J] . Journal of Alloys and Compounds, 2008, (466): 201-204.[18] WANG X F, ZHANG Y, QIAO Y, et al. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys[J]. Intermetallics, 2007, (15): 357-362.[19] Zhang H, Pan Y, He Y. Effects of annealing on the microstructure and properties of 6FeNiCoCrAlTiSi high-entropy alloy coating prepared by laser cladding[J]. Journal of thermal spray technology, 2011, 20(5): 1049-1055.[20] Hui Zhang, Yizhu Hea, Ye Pan. Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening[J]. Scripta Materialia, 2013, (69): 342-345.
2016, Vol. 26 
