[1] 张弛, 徐春. 金属粉末注射成形技术[M]. 北京: 化学工业出版社, 2007.[2] 贺毅强, 陈振华, 陈志钢, 等. 金属粉末注射成形的原理与发展趋势[J]. 材料科学与工程学报, 2013, 31(2): 317-322.[3] 曲选辉. 粉末注射成形的研究进展[J]. 中国材料进展, 2010, 29(5): 42-47.[4] Sidambe A T, Figueaoa I A, Hamilton H G, et al. Metal injection moulding of CP-Ti components for biomedical applications[J]. Journal of Materials Processing Technology, 2012, 212(7): 1591-1597.[5] Zhao D, Chang K, Ebel T, et al. Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical meterial[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2013,28(4): 171-182.[6] 陈鸿璋, 曾凡同, 唐凯, 等. 金属粉末注射成形的工艺研究与应用[J]. 精密成形工程, 2012, 4(2): 46-53.[7] Antusch S, Norajitra P, Piottor V, et al. Powder Injection Molding-Aninnovation manufacturing method for He-cooled DEMO divertor components[J]. Fusion Engineering and Design, 2011, 86(9): 1575-1578.[8] 臧若愚, 曲选辉, 尹海清. 金属粉末注射和成型技术在航空制造业的应用[J].航空制造技术, 2009, (3): 47-50.[9] Lenz J, Enneti R K, Park S J, et al. Powder injection molding process design for UAV engine components using nanoscale silicon nitride powders[J]. Ceramics International, 2014, 40(1): 893-900.[10] 李伟, 史庆南, 裴和衷, 等. 粉末注射成型工艺参数对产品性能的影响[J]. 材料开发与应用, 2008, 23(1): 31-34.[11] 李玲. ZrO2小型零件粉末注射成形与精度控制[D]. 哈尔滨: 哈尔滨工业大学, 2007.[12] Shivashankar T S, Enneti R K, Park S J, et al. The effects of material attributes on powder-binder separation phenomena in powder injection molding[J]. Powder Technology, 2013, 243(7): 79-84.[13] 王玉会, 曲选辉, 何新波等. 粉末注射成型过程的双流体数学模型[J]. 机械工程材料, 2008, 32(5):74-77.[14] Kim J, Ahn S, Atre S V, et al. Imbalance filling of multi-cavity tooling during powder injection molding[J]. Powder Technology, 2014, 257(5): 124-131.[15] 刘琼. 塑料注射Moldflow适用教程[M]. 北京: 机械工业出版社, 2008.[16] 方伟, 何新波, 张瑞杰. 粉末注射成形冲模过程中粉体分布的数值模拟[J]. 粉末冶金材料科学与工程, 2013, 18(2): 149-154.[17] Samanta S K, Chattopadhyay H, Pustal B, et al. A numerical study of solidification in powder injection molding process[J]. International Journal of Heat and Mass Transfer, 2008,51(3-4): 672-682.[18] 苏衡. 金属粉末注射过程的试验, 建模与数值模拟[D]. 成都: 西南交通大学, 2011.[19] Iwai T, Aizawa T, Kihara J. Numerical modeling for powder-binder compound flow in metal injection molding[J]. Advances in Powder Metallurgy&Particulate materials, 1995, 49(3): 23-26.[20] 卓海宇, 高建祥, 曲选辉. 金属粉末注射成形充模过程数学模型研究[J]. 新技术新工艺, 2007, (6): 87-90.[21] 严志云, 严友兰. 陶瓷螺杆的粉末注射成型模拟研究[J]. 塑料制造, 2010, (4): 89-92.[22] Jiang S, Wang Z, Zhou G, et al. An implicit control-volume finite element method and its time step strategies for injection molding simulation[J]. Computers & Chemical Engineering, 2007, 31(11): 1407-1418.[23] 王玉会, 曲选辉, 何新波. 粉末注射成形多相流动过程数值模拟模型[J]. 北京科技大学学报, 2007, 29(7): 717-720.[24] 王玉会, 曲选辉, 何新波等. 粉末注射成形充模过程特有边界层效应的数值模拟[J]. 机械工程材料, 2008, 32(2): 77-80.[25] 郑洲顺, 曲选辉, 韩旭里等. 粉末注射成形冲模流动过程模壁凝固层增长的计算与模拟[J]. 中国有色金属学报, 2008, 18(3): 511-515.[26] 郑洲顺, 王爽, 李俏杰, 等. 复杂零件粉末注射成形多项流动过程三维数值模拟[J]. 稀有金属材料与工程, 2013, 42(8): 1585-1589.[27] 郑洲顺, 曲选辉,徐勤武等.粉末注射成形两相流动三维数值模拟及粉末与粘结剂分离[J].中国有色金属学报,2014, 24(1): 122-129.[28] 刘煜, 李益民, 肖燕芳等. 粉末注射成型中颗粒接触模型的研究[J]. 长沙大学学报, 2010, 24(5): 30-33.[29] 李大鹏. 基于颗粒模型的粉末注射成形充模流动过程研究[D]. 长沙: 中南大学, 2013.[30] 李德波,孙超凡,彭泽宏.循环流化床全热态数值模拟方法的研究进展[J].广东电力,2015,28(4):1-6. |