|
|
The design of drilling fixture for the pin hole on oil pump rotor shaft |
SHANG Wei1,ZHANG Ju-xiang2,SHEN Xiao-ping2 |
1.School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China 2. Engineering Training Center, Nanjing University of Science and Technology, Nanjing 210094, China |
|
|
Abstract Based on the basic structure of the oil pump rotor, the locating scheme and clamping scheme, the design of the locating and clamping device, and the design of ensemble structure of special drill jig in the production were presented. Aiming at the problem of lacking of generality on special drilling jig, the adjustable fixture, modular fixture and other solutions were put forward to ensure processing quality, improve machining efficiency, reduce processing time and reduce production costs.
|
Received: 10 September 2015
Published: 15 December 2016
|
|
|
|
[1] 周作平,申小平等.粉末冶金机械零件实用技术[M].北京:化学工业出版社,2005.6[2] 龚安定,蔡建国等.机床夹具设计原理[M].西安:陕西科学技术出版社,1981.[3] 宋殷.机床夹具设计[M].武汉:华中理工大学出版社,1990.[4] 袁军堂.机械制造技术基础[M].北京:清华大学出版社,2009.[5] 刘远娟.连接杆固定式钻模夹具的设计[J].机电工程技术,2014,43(09):85-89. |
|
|
|