酚醛树脂含量对汽车摩擦材料性能的影响

doi:10.13228/j.boyuan.issn1006-6543.20160070

Abstract
Figure/Table
References
Related Citation (5)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Five kinds of composite brake with phenolic resin mass percent of 4%-12% was prepared through hot pressing method. The Link3000 inertia friction test bench， Link3900 NVH inertia friction test bench and Link3336 compression testing machine were used to test the friction performance， noise performance and compression performance of the brake. The effect of phenolic resin content on the friction and wear properties of the brake were discussed combined with the microstructure and mechanical properties analysis. Results show that with the increase of phenolic resin content， the average friction coefficient and high temperature friction coefficient decrease， leading to recession. At the same time， the braking noise， the noise probability and the noise intensity increase. When the mass percent of phenolic resin is 6%， the friction coefficient has the best stability， which is not easy to cause recession； and the noise probability is the minimum when the mass percent of phenolic resin is 4%-6%.

Key words： phenolic resin friction material friction coefficient recession noice

Received: 06 June 2016 Published: 14 November 2017

Fund:Foundation of State Key Laboratory of Powder Metallurgy

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Bo-Wei
	CHEN Jie
	YANG Yang
	CHEN Gang

Cite this article:

LIU Bo-Wei,CHEN Jie,YANG Yang, et al. The effect of phenolic resin content on properties of automotive friction material[J]. , 2017, 27(05): 18-24.

URL:

http://edit.chinamet.cn/Jweb_fmyjgy/EN/10.13228/j.boyuan.issn1006-6543.20160070 OR http://edit.chinamet.cn/Jweb_fmyjgy/EN/Y2017/V27/I05/18

[1] Gurunath P V,Bijwe J.Friction and wear studies on brakepad materials based on newly developed resin [J].Wear,2007,263:1212
[2] Bernard S S,Jayakumari L S.Effect of the properties of natural resin binder in a high friction composite material [J].Polimeros,2014,24(2):149
[3] Hwang H J,Jung S L,Cho K H,et al.Tribological performance of brake friction materials containing carbon nanotubes[J].Wear,2010,268(3-4):519
[4] 袁新华,何坤,陈敏,等.桐油改性酚醛树脂的制备及其性能[J].江苏大学学报:自然科学版,2007(6):500
[5] 苏堤,罗成,潘运娟等. 树脂基汽车复合摩擦材料的磨损机理[J].粉末冶金材料科学与工程.2007,12(4):221-224
[6] 潘继城. 热固性腰果酚醛树脂(CF树脂)[A]. 中国环氧树脂应用技术学会“第十三次全国环氧树脂应用技术学术交流会”[C].2009
[7] 阴强,李爱菊,王威强等. 酚醛树脂含量对R/C复合材料性能的影响[J].硅酸盐通报,2005(4):97-99
[8] 赵君山.梁化鹏,牛凯兰,芦佳,顾海兵. 不同含量硼改性酚醛树脂基复合摩擦材料性能研究[J]. 农业开发和装备, 2004.
[9] 郭新涛．复合材料摩擦片热衰退机理初步研究[J]．玻璃钢/复合材料，2002
[10] Ingram M,Spikes H,Nole J,et al. Contract protecties of a wet clutch friction material [J]. Tribology International, 2010, 43(4): 815-821.
[11] Rhee S K,Jack M G,Tsang P H S.The role of friction film in friction,Wear and noise automotive brakes[J].Wear,1991.146(11):89-97Rhee S K.Wear equation for polymer sliding against metal surfaces[J].Wear,1970,16(6):431-445.
[12] 王尚, 张玉军, 赵东亮. 六钛酸钠(钾)混合晶须对树脂基摩擦材料性能的影响[J]. 中国陶瓷,2010,06:11-13.
WANG Shang, ZHANG Yujun, ZHAO Dongliang. Effect of Sodium (Potassium) Titanate Whiskers on the Property of Resin-Based Friction Materials[J]. China Ceramics, 2010, 06:11-13.
[13] Yun Cheol Kima, Min Hyung Choa, Seong Jin Kimb, Ho Janga,et al. The effect of phenolic resin, phenolic resin, and CNSL on the tribological properties of brake friction materials. Wear,2008: 204–210