|
|
Tribological properties of nano-particles reinforced copper-based spray friction plate |
ZHANG Guo-hong1, XU Cheng-fa1, FENG Xiu-ming1,XU Yao1, DU Jian-hua 2 |
1 Hangzhou Advance Gearbox Group Co., Ltd., Hangzhou 311203, China,2 Armored Force Engineering Institute of Technology, Beijing 100000, China |
|
|
Abstract The effects of nano-materials, ball milling and graphite morphology on tribological properties of copper-based spray friction materials were studied by adjusting the composition ratio, adding nano-materials, adopting ball milling process and changing graphite morphology. The results show that adding Ni/n-SiO2 and ball-milled Cu/natural graphite, ball-milled Cu/n-SiO2 and ball-milled Cu/natural graphite can improve the comprehensive properties of copper-based spray friction plates. Ball-milled Cu/nano graphite+ball milled Cu/natural graphite can improve the wear resistance and heat resistance of copper-based spray friction materials, but can significantly reduce the friction coefficient of friction materials. The preparation of Cu-graphite composite particles by ball milling method can increase the graphite content in the matrix of copper-based spray friction materials, thus significantly improve the heat resistance of friction materials.
|
Received: 31 August 2018
|
|
|
|
|
|
|