|
|
Research status on the wear of PCBN super-hard material cutting tool in machining different cast iron material |
LI Pan-lai, ZHANG Feng-lin, BAI Kun |
College of Mechanical and Electronic Engineering, Guangdong University of Technology,Guangzhou 510006, China |
|
|
Abstract Because of high hardness, good wear resistance and chemical stability, the application of PCBN super-hard material cutting tools in the field of automobile manufacturing is becoming more and more widely. Research status on the wear of PCBN cutting tool in machining gray cast iron, nodular cast iron and vermicular cast iron were summarized and analyzed. The wear?mechanisms of PCBN cutting tools in machining three kinds of cast iron were discussed mainly from several aspects, such as cutting tool material, process parameters, workpiece material, cutting conditions and processing way etc.. Finally, the wear situations of tools in cutting different types of cast iron were summarized.
|
Received: 15 May 2014
Published: 18 December 2014
|
|
|
|
[1] |
王光祖.PCBN刀具的特性与应用[J].磨料磨具通讯, 2004, (2):6-10
|
[2] |
刘书锋, 聂建军.整体 刀具高速铣削发动机缸体缸盖的应用[J].工具技术, 2010, 44(012):60-63
|
[3] |
王德跃, 王华侨, 张杰.高速切削在铸铁和合金钢加工中的应用研究 [J].CAD/CAM 与制造业信息化, 2005, (11):85-89
|
[4] |
Kato H, Shintani K, Sumiya H.Cutting performance of a binder-less sintered cubic boron nitride tool in the high-speed milling of gray cast iron[J].Journal of materials processing technology, 2002, 127(2):217-221
|
[5] |
李海波, 张弘弢, 董海, 等.刀片的研究制造现状及发展[J].工具技术, 2007, 41(10):10-13
|
[6] |
王文龙, 谢志刚, 何绪林, 张延军, 李立惟, 朱旭.Co对PCBN复合片的烧结及性能的影响[J].超硬材料工程, 2013, (2):16-21
|
[7] |
姚学祥, 陈康华.刃口倒棱对断续切削灰口铸铁的YCBO11刀具寿命影响[C].第九次全国硬质合金学术会议论文集.2006:154-158.
|
[8] |
宋银胜.PCBN 刀具镗削灰铸铁的工艺试验[J].机械工艺师, 2000, (6):22-23
|
[9] |
朱从容, 王魄.整体 PCBN 刀片高速切削灰铸铁的研究[J].现代制造工程, 2002, (5):31-33
|
[10] |
陈五一.用 刀具高速切削灰铸铁的试验研究[J].北京航空航天大学学报, 1998, 24(2):216-219
|
[11] |
Gastel M, Konetschny C, Reuter U, et al.Investigation of the wear mechanism of cubic boron nitride tools used for the machining of compacted graphite iron and grey cast iron[J].International Journal of Refractory metals and hard materials, 2000, 18(6):287-296
|
[12] |
Heck M, Ortner H M, Flege S, et al.Analytical investigations concerning the wear behaviour of cutting tools used for the machining of compacted graphite iron and grey cast iron[J].International Journal of Refractory Metals and Hard Materials, 2008, 26(3):197-206
|
[13] |
刘战强, 万熠.刀具磨损形态与磨损规律的实验研究[J].农业机械学报, 2004, 35(5):229-231
|
[14] |
Katuku K, Koursaris A, Sigalas.Wear, cutting forces and chip characteristics when dry turning ASTM Grade 2 austempered ductile iron with PcBN cutting tools under finishing conditions[J].journal of materials processing technology, 2009, 209(5):2412-2420
|
[15] |
李玉标, 李嫚, 张弘弢, 等.不同聚晶立方氮化硼刀具断续干式车削等温淬火球墨铸铁时的磨损对比[J].机械工程材料, 2011, 35(6):72-75
|
[16] |
李玉标, 李嫚, 张弘弢, 等.PCBN刀具断续干式切削ADI 时切削力与寿命的研究[J].金刚石与磨料磨具工程, 2010, (1):75-79
|
[17] |
张弘弢, 李海波, 董海, 等.不同聚晶立方氮化硼复合刀具加工等温淬火球墨铸铁的切削性能对比[J].机械工程材料, 2008, (8):43-46
|
[18] |
Katuku K, Koursaris A, Sigalas I.Structural features of the austempered ductile iron–PcBN cutting tool interaction interface as captured through static diffusion couple experiments[J].Solid State Ionics, 2012, (224):41-50
|
[19] |
Katuku K, Koursaris A, Sigalas I.Wear mechanisms of PcBN cutting tools when dry turning ASTM Grade 2 austempered ductile iron under finishing conditions[J].Wear, 2010, 268(1):294-301
|
[20] |
Grzesik W, Kiszka P, Kowalczyk D, et al.Machining of nodular cast iron (PF-NCI) using CBN tools [J].Procedia CIRP, 2012, (1):483-487
|
[21] |
Grzesik W, Kiszka P, Kowalczyk D, et al.Investigation of the machining process of spheroidal cast iron using cubic boron nitride (CBN) tools[J].Metalurgija, 2014, 53(1):33-36
|
[22] |
刘海涛, 李嫚, 张弘弢.刃口钝化对 刀具切削性能影响的研究[J].工具技术, 2011, 45(4):29-32
|
[23] |
佟艳娇.PCBN 刀具负倒棱作用及其加工球墨铸铁的研究[D]. 大连理工大学, 2006.
|
[24] |
任帅民.PCBN 刀具断续切削时负倒棱参数的研究[D]. 大连: 大连理工大学, 2009.
|
[25] |
孙娜.不同仿生耦合单元体对蠕墨铸铁摩擦磨损性能的影响 [D].吉林大学, 2010.
|
[26] |
Dawson S, Schroeder T.Practical applications for compacted graphite iron[J].AFS Transactions, 2004, 47(5):1-9
|
[27] |
Abele E, Sahm A, Schulz H.Wear mechanism when machining compacted graphite iron[J].CIRP Annals-Manufacturing Technology, 2002, 51(1):53-56
|
[28] |
Gastel M, Reuter U, Schulz H, et al.SIMS analysis of the wear of boron nitride tools for the machining of compacted graphite iron and grey cast iron[J].Fresenius' journal of analytical chemistry, 1999, 365(1-3):142-146
|
[29] |
Dawson S, Hollinger I, Robbins M, et al.The effect of metallurgical variables on the machinability of compacted graphite iron[J].SAE Transactions: Journal of Materials & Manufacturing, 2001, (110):334-352
|
[30] |
Tyler Stalbaum..high speed turnning of compacted graphite iron(CGI)using controlled modulation[D].purdue university, 2013.
|
[31] |
Guo Y, Mann J B, Yeung H, et al.Enhancing Tool Life in High-Speed Machining of Compacted Graphite Iron (CGI) Using Controlled Modulation[J].Tribology Letters, 2012, 47(1):103-111
|
|
|
|