|
|
|
| The performance improvement and selection of lubricant for production of PM components |
| HAN Feng-lin |
| PM Association of China General Machine Components Industry Association, Beijing 100825, China |
|
|
|
|
Abstract In the production of PM components, admixed lubricant in the metal powder mix is the most common way to achieve the lubrication needed during compaction and ejection of the components. However, the type of lubricant not only influences the compaction, but also the properties of the powder mix as well as the properties of the green component and sintered parts. The most commonly used lubricants were reviewed, and the advances in binder/lubricant systems in the past two decades were introduced.
|
|
Received: 10 December 2013
Published: 29 April 2015
|
|
|
|
| 1． Mats Larsson, Maria Ramstedt, Lubricantsf for Compacton of P/M Components. Presented at PTECH 2003, in Guarujá, S?o Paulo, Brazi。2． 韩凤麟主编，粉末冶金手册（上），北京：冶金工业出版社，2012年5月，443-454。3． ?sa Ahlin, Anna Ahlqvist and Ola Litstr?m, Newly Developed Lubricants for High Performance Metal Powder Mixes . Presented at PM 2008,inMannheim,Germany, Sept. 30 ,2008.4． 韩凤麟，葛昌纯编，钢铁粉末生产，北京：冶金工业出版地社，1981年5 月 101-1075． Chris Schade, Mike Marucci, Fran Hanejko, 通过预混合粉的粘结剂处理改善粉末性能，粉末冶金技术，Vol.29,No.6(2011), 468-473.6． Sydney H. Luk, Advance in Binder-Treatment Technology, Presented at 2000 Powder Metal World Congress ＆ Exhibition, NY.7． Sylvain St-Laurent, Claude Gélinas, Yanning Thomas* and Lhoucine Azzi*, Using Binder-Treatment Technology for High Performance Steel Powder Mixes, Presented at PM2TEC 2005 Conference in Montrea.8． George Poszmik,, Michael L., Marucci, and K.S. Narasimhan , Single Pressed Single Sintered P/M Products for High Density, High Performance Applications, Presented at PM 2004 World Congress, Vienna,Austria.9． PowderMet 2013: New lubricant system from Hoeganaes facilitates higher density PM parts. http://www. Ipmd net /articles/001578.htm1#sthash.dUVoZ0Dj.dpuf |
|
|
|
2015, Vol. 25 
