|
|
Effect of torsion radius on the microstructure and hardness of SiCp/Al composite produced by high pressure torsion |
LIN Li-jing, WANG Cheng-guo, Li Ping, QIAO Shuo |
(School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China) |
|
|
Abstract SiCp/Al composites have a widespread use in the field of aerospace, automobile and so on, because of their good wear resistance, high specific strength and low coefficient of thermal expansion. High pressure torsion (HPT) was used to prepare SiCp/Al composites. The influence of torsion radius on the microstructure and hardness of the composite was investigated. The results show that the shear strengthening and equivalent strain increase, the particle agglomeration decreases, the distribution of SiC is more uniform and the micro-hardness of the composite increases with the increasing of torsion radius.
|
Received: 30 December 2013
Published: 29 April 2015
|
|
|
|
[1] 李建辉, 李春峰, 雷廷权等. 金属基复合材料成形加工研究进展[J]. 材料科学与工艺, 2002, 10(2): 207-212.[2] Chawla N., Ganesh V.V., Wunsch B. Three-dimensional(3D) microstructure visualization and finite element modeling of the mechanical behavior of SiC particle reinforced aluminum composites[J]. Scripta Materialia, 2004, 51(2): 161-165.[3] 王文明,潘复生,曾复民.碳化硅颗粒增强铝基复合材料开发与应用的研究现状[J].兵器材料科学与工程,2004,27(3): 61-67.[4] Stolyarov V.V., Zhu Y.T., Lowe T.C., et al. Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti Powder using high Pressure torsion[J]. Materials Science and Engineering,1999,A82(1):78-85.[5] Sakai Genki, Nakamura Katsuaki, Horita Zenji, et al. Developing high-pressure torsion for use with bulk samples[J]. Materials Science and Engineering, 2005, A406(1): 268-273.[6] 上官丰收,谢季佳,洪友士.压扭转致纯铜晶粒细化及与应变的关系[J].材料研究学报,2007,21(1): 72-76.[7] Habraken AM., Cescotto S. Automatic remeshing technique for finite element simulation of forming processes[J]. International Journal for Numerical in Methods in Engineering, 1990, 30(8): 1503-1525.[8] Zhilyaev A.P., Nurislamova G.V., Kim B.-K, et al. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion[J]. Acta Materialia, 2003, 51(3): 753-765.[9] Wetscher F., Vorhauer A., PipPan R. Strain hardening during high pressure torsion deformation[J]. Materials Science and Engineering, 2005, A(410–411): 213-216. |
|
|
|