|
|
The development and key technological improvement of synthetic diamond in China |
LUO Xi-yu1,2, XU Yan-jun2,3, LIU Yi-bo2,3 |
1. China Iron & Steel Research Institute Group Ltd., Beijing 100081, China 2. Advanced Technology & Materials Co., Ltd., Beijing 100081, China 3. Beijing Gang Yan Diamond Products Company, Beijing 102200, China |
|
|
Abstract Synthetic diamond was started in 1963 in China. The evolution data of its output and quality were presented. The output has been successively at the top of the world from 2000 until 2013 and quality has attained the advanced world level. A quality evaluation method revealing the intrinsic quality was also presented, which is the first chemical evaluation method for the absolute content determination of oxygen, nitrogen and other impurity in diamond. The content comparative analysis of representative diamond at home and abroad was made by this way. The testing results are very approached to each other. The achievement in the field of synthetic diamond in China should owe to three major technological improvements: large-sized cubic hinge press, high quality cemented carbide anvil and industrialization of powder catalyst and indirect heating. Technological characteristics and development of the three aspects were elaborated.
|
Received: 01 September 2015
Published: 01 February 2016
|
|
|
|
[1] 李志宏,赵博,孙兆达.半世纪风云 五十年辉煌[C]//第六届郑州国际超硬材料及制品研讨会论文集. 河南科学技术出版社. 郑州:2013,11:1~13[2] 砂川一郎.ダイヤモ冫ドの物性と结晶化学[J]。Journal of the Materials Science Society of Japan,1985,22(1):5~10[3] 罗锡裕,赵同春,黄漫,等.提高金刚石工具性能的研究与启示[C]//第四届郑州国际超硬材料及制品研讨会论文集. 河南科学技术出版社. 郑州:2013,11;101~117[4] 沈翔,徐燕军,尹翔,等.从包裹体氧氮含量看我国金刚石质的飞跃及提高品质的方向[J]。金刚石及磨料磨具工程,2012,32(6):34~39[5] 罗锡裕,高光洁子,曹枨,等.金刚石氧氮及其他杂质含量的分析研究[C]//第十八届中国超硬材料技术发展论坛论文集. 太原:2014,10:45~50[6] 郭滇生,周福平,陈振勤,等.国内外六面顶压机主机结构的现状及展望[C]//中国超硬材料与制品50周年精选文集. 浙江大学出版社. 桂林:2014,8:73~78[7] 徐燕军,麻洪秋,彭文,等.中国金刚石工业与粉末冶金[C]//2009年全国粉末冶金学术交流会论文集. 张家界:2009:21~28 |
|
|
|