[1] 刘超.3D打印领导个性制造DIY--2013世界3D打印技术产业大会报道[J]. 新材料产业, 2013(7):69-71.
[2] ASTM F3049-14, Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes (West Conshohocken, PA: ASTM,2014) .
[3] 宁文波,杨铁男,赵建波,郑要权. 粉末材料的物理性能对选择激光烧结的影响[J]. 山东轻工业学报,2006,20(1):86-88.
[4] 杨启云,吴玉道,仲守亮.3D打印专用粉末的特性研究[J].2015年全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会文集:143—147.
[5] 黄培云,阮建明. 粉末冶金原理[M].北京: 机械工业出版社,2012:100-102
[6] AP&C.等离子雾化粉末[EB/OL].http://www.tqmmm.com.cn/taifen/?/site/cpti. 2016.
[7] 熊博文,徐志锋,严青松,蔡长春.直接选区激光烧结金属粉末材料的研究进展.金属铸锻焊技术,2008,37(9):92-99.
[8] 欧阳鸿武,何世文,刘咏. 金属粉末性能对选区激光烧结件质量的影响[J].粉末冶金材料科学与工程,2004,9(2):106—111.
[9] Momeni A, Abbasi S M. Effect of hot working on flow behavior of Ti–6Al–4V alloy in single phase and two phase regions[J]. Materials & Design,2010, 31(8):3599-3604.
[10] 林伟凯.3D打印用金属粉末市场分析. 粉体及粉末冶金会刊,2015,40(2):153-154.
[11] 汤慧萍,王建. 金属3D打印中的材料问题及对策.2015年全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会文集:68—69.
[12] 汤慧萍, 王建, 逯圣路,等. 电子束选区熔化成形技术研究进展[J]. 中国材料进展, 2015, 34(3):225-235.
[13] 杨鑫,汤慧萍,葛渊. 粉末性能对电子束选区熔化快速成形的影响[J]. 稀有金属材料与工程,2007,36(A03):574-577.
[14] Lagutkin S, Achelis L, Sheikhaliev S, et al. Atomization process for metal powder[J]. Materials Science and Engineering A, 2004, 383(1): 1-6.
[15] Liu Y, Niu S; Li F, et al. Preparation of amorphous Fe-based magnetic powder by water atomization[J]. Powder Technology, 2011, 213(1-3):36-40.
[16] Feng Y, Qiu T. Preparation, characterization and microwave absorbing properties of FeNi alloy prepared by gas atomization method[J]. Journal of Alloys and Compounds, 2012, 513: 455-459.
[17] Yang M, Dai Y, Song C, et al. Microstructure evolution of grey cast iron powder by high pressure gas atomization[J]. Journal of Materials Processing Technology, 2010, 210(2): 351-355.
[18] Schulz G.Nanoval. Process Offers Fine Powder Benefits[J].Metal Powder Research,1996,51(11):30-33.
[19] Xu J L, Khor K A, Gu Y W, et al. Radio frequency (rf) plasma spheroidized HA powders: powder characterization and spark plasma sintering behavior [J]. Biomaterials, 2005, 26(15): 2197-2207.
[20] Lin H F, Liao S C, Hung S W. The do thermal plasma synthesis of ZnO nanoparticles for visible-light photocatalyst [J]. Journal of photochemistry and photobiology A: Chemistry, 2005, 174(1): 82-87.
[21] Lee J E, Oh S M, Park D W. Synthesis of nano-sized A1 doped TiO2 powders using thermal plasma[J]. The Solid Films, 2004, 457(1): 230-234.
[22] 白柳杨, 袁方利, 胡鹏,等. 高频等离子体法制备微细球形镍粉的研究[J]. 电子元件与材料, 2008, 27(1):20-22.
[23] Kobayashi N, Kawakami Y, Kamada K, et al. Spherical submicron-size copper powders coagulated from a vapor phase in RF induction thermal plasma[J]. Thin Solid Films, 2008, 516(516):4402-4406.
[24] 国为民,陈生大,万国岩. 用不同方法制取的镍基高温合金粉末性能[J]. 航空工程与维修,1998(2):22-24.
[25] 杨鑫,奚正平,刘咏,等. 等离子旋转电极法制备钛铝粉末性能表征[J].稀有金属材料与工程,2010,39(12): 2251-2254.
[26] 陈焕铭,胡本芙,李慧英,等.等离子旋转电极雾化FGH95高温合金粉末颗粒凝固组织特征[J].金属学报,2003,39(1): 30-34.
[27] AP&C.等离子雾化技术[EB/OL]. http://www.tqmmm.com.cn/taifen/?/site/ourtech/.2016.
[28] 汤慧萍,王建,逯圣路,等.电子束选区熔化成形技术研究进展[J].中国材料进展, 2015,34(3):225-235.
[29] Hengfeng Gu, Haijun Gong, J. J. S. Dilip, et al. Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting[C].International Solid Freeform Fabrication Symposium. 2014:39-44.
[30] Karlsson J, Snis A, Engqvist H, et al. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions[J]. Journal of Materials Processing Technology, 2013, 213(12):2109-2118.
[31] Kruth J P, Froyen L, Vaerenbergh J V, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004,149(s 1–3):616-622.
[32] Wang Y, Bergstr?m J, Burman C. Characterization of an iron-based laser sintered material[J]. Journal of Materials Processing Technology, 2006, 172(1):77-87.
[33] Morgan R, Sutcliffe C J, O'Neill W. Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives[J]. Journal of Materials Science, 2004, 39(4):1195-1205.
[34] Rosenthal I, Stern A, Frage N. Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology[J]. Metallography Microstructure & Analysis, 2014, 3(6):1-6.
[35] Olakanmi E O,Cochrane R F, Dalgarno K W. Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders[J]. Journal of Materials Processing Technology, 2011, 211(1):113-121.
|