[1]Wang J W, Wang Y, Liu Y, et al.Densification and microstructural evolution of a high niobium containing TiAl alloy consolidated by spark plasma sintering[J]., 2015, 64:70-77
[2]Clemens H, Smarsly W.Light-weight intermetallic titanium aluminides-status of research and development[J].Advanced Materials Research, 2011, 278:551-556
[3]陈玉勇, 杨非, 孔凡涛, 等.TiAl合金的热加工、组织和性能[J].中国材料讲展, 2010, (03):12-17
[4]杨锐.钛铝金属间化合物的进展与挑战[J].金属学报, 2015, (02):129-147
[5]Schwaighofer E, Clemens H, Mayer S, et al.Microstructural design and mechanical properties of a cast and heat-treated intermetallic mufti-phase γ-TiAl based alloy[J].Intermetallics, 2014, 44:128-140
[6]Wang Y, Liu Y, Yang G Y, et al.Hot deformation behaviors of β phase containing Ti-43Al-4Nb-1.4W-based alloy[J].Mater Sci Eng A, 2013, 577:210-217
[7]Voisin T, Muriel J P, Monchoux H, et al.Microstructures and mechanical properties of a multi-phase β-solidifying TiAl alloy densified by spark plasma sintering[J].Acta Materialia, 2014, 73:107-115
[8]陈玉勇, 张树志, 孔凡涛, 等.新型β-γ合金的研究进展[J].稀有金属, 2012, 36(1):154-160
[9]Schloffer M, Schmoelzer T, Mayer S, et al.The characterisation of a powder metallurgically manufactured TNM(TM) titanium aluminide alloy using complimentary quantitative methods[J].Practical Metallography, 2011, 48(11):594-604
[10]Vajpai S K, Ameyama K.A novel powder metallurgy processing approach to prepare fine-grained Ti-rich TiAl-based alloys from pre-alloyed powders[J].Intermetallics, 2013, 42:146-155
[11]刘咏, 黄伯云, 周科朝, 等.热等静压对粉末冶金TiAl合金显微组织和相成分的影响[J].粉末冶金技术, 2001, (03):165-169
[12]吴杰, 徐磊, 郭瑞朋, 等.粉末冶金----合金的制备及力学性能影响因素[J].材料研究学报, 2015, 29(2):127-134
[13]Luo J S, Voisin T, Monchoux J P, et al.Refinement of lamellar microstructures by boron incorporation in GE-TiAl alloys processed by spark plasma sintering[J].Intermetallics, 2013, 36 :12-20
[14]Huang Y J, Wang Y, Fan H B, et al.A TiAl based alloy with excellent mechanical performance prepared by gas atomization and spark plasma sintering[J].Intermetallics, 2012, 31:202-207
[15]王建军.中国雾化制粉技术现状简介[J].粉末冶金工业, 2016, 26(5):1-4
[16]曹勇家, 钟海林, 郝权, 等.粉末冶金生产上艺的两大发展[J].粉末冶金工业, 2011, 21(1):45-53
[17]王刚, 郑卓, 常立涛, 等.预合金粉末的表征和后续致密化显微组织特点[J].金属学报, 2011, 47(10):1263-1269
[18]杨冬野.钛铝合金气雾化及其烧结成形的组织与相结构[D]. 哈尔滨: 哈尔滨工业大学(博士学位论文), 2015.
[19]Zeoli N, Gu S.Computational simulation of metal droplet break-up,cooling and solidification during gas atomisation[J].Computational Materials Science, 2008, 43(2):268-278
[20]Shu S L, Qin F, Ring B, et al.Effect of strain rate on the compression behavior of TiAl and TiAl-2Mn alloys fabricated by combustion synthesis and hot press consolidation[J].Intermetallics, 2013, 43:24-28
|