[1] 张义文, 迟悦. 俄罗斯粉末冶金高温合金研制新进展[J]. 粉末冶金工业, 2012, 22(5): 37-45. [2] 张义文, 迟悦, 刘建涛. 俄罗斯新型粉末高温合金研制进展[J]. 粉末冶金工业, 2015, 25(4): 1-14. [3] Гарибов Г С. Теория кристаллизации и технология гранулируемых жаропрочных никелевых сплавов[J]. Технология Лёгких Сплавов, 2016(1): 107-118. [4] Гарибов Г С. Перспективы развития отечественных дисковых гранулируемых жаропрочных никелевых сплавов для новых образцов авиационной техники[J]. Технология Лёгких Сплавов, 2017(1): 7-28. [5] Волков А М, Востриков А В, Бакрадзе М М. Принципы создания и особенности легирования гранулируемых жаропрочных никелевых сплавов для дисков ГТД[J]. Труды ВИАМ, 2016(8): 10-16. [6] Razumovskii I M, Ruban A V, Razumovskii V I, et al. New generation of Ni-based superalloys designed on the basis of first-principles calculations[J]. Materials Science and Engineering A, 2008, 497: 18-24. [7] Razumovskii V I, Lozovoi A Y, Razumovskii I M. First-principles-aided design of a new Ni-base superalloy Influence of transition metal alloying elements on grain boundary and bulk cohesion[J]. Acta Materialia, 2015, 82: 369-377. [8] Береснев А Г, Разумовский В И, Лозовой А Ю, и др. Развитие теории легирования для создания нового поколения жаропрочных никелевых сплавов, получаемых методами порошковой металлургии[J]. Технология Лёгких Сплавов, 2012(2): 52-61. [9] Береснев А Г, Разумовский В И, Логунов А В, и др. Теоретический анализ системы легирования и принцпы создания нового поколения жаропрочных никелевых сплавов, получаемых методами гранульной металлургии[J]. Цветные Металлы, 2012(6): 63-67. [10] Береснев А Г, Логунов А В, Логачева А И, и др. Жаропрочный гранулированный сплав на основе никеля: RU2386714[P]. 2010-04-20. [11] Волков А М, Востриков А В. Образование и рост зерен в дисковых гранулируемых жаропрочных никелевых сплавах[J]. Новости Материаловедения. Наука и Техника, 2017(2): 3-11. [12] Бакрадзе М М, Волков А М, Шестакова А А, и др. Особенности изменения размера зерен в дисковом гранулируемом жаропрочном никелевом сплаве произведенном по различным технологиям [J]. Труды ВИАМ, 2018(2): 3-11. |