3D打印用金属粉末的性能特征及研究进展

doi:10.13228/j.boyuan.issn1006-6543.20160062

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Different from traditional manufacturing， 3D printing (additive manufacturing) is a new manufacturing technology with simplified manufacturing process， lower manufacturing costs and shorter development cycles. Nowadays， 3D printing technology is no more confined in laboratory， but now much toward to industrialization. But the limited variety， mass production and performance of the metal powder specifically used for 3D printing have became a constraint to the fast and healthy development of the industry. Metal powders for 3D printing need to meet the requirements of high purity， high sphericity and narrow particle size distribution. Major manufacturing technology for 3D printing metal powders includes atomization， plasma， rotation electrode process， plasma wire atomizing technologies. The effects of powder requirements， preparation methods and powder properties on the forming effect of 3D printing parts were introduced. The existing problems in the preparation of metal powders for 3D printing were also discussed.

Key words： 3D printing metal powder property

Received: 27 May 2016 Published: 14 November 2017

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Chao-Feng

Cite this article:

GAO Chao-Feng. Performance characteristics and research progress of metal powders for 3D printing[J]. , 2017, 27(05): 53-58.

URL:

http://edit.chinamet.cn/Jweb_fmyjgy/EN/10.13228/j.boyuan.issn1006-6543.20160062 OR http://edit.chinamet.cn/Jweb_fmyjgy/EN/Y2017/V27/I05/53

[1] 刘超.3D打印领导个性制造DIY--2013世界3D打印技术产业大会报道[J]. 新材料产业, 2013(7):69-71. [2] ASTM F3049-14, Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes (West Conshohocken, PA: ASTM,2014) . [3] 宁文波,杨铁男,赵建波,郑要权. 粉末材料的物理性能对选择激光烧结的影响[J]. 山东轻工业学报,2006,20（1）：86-88. [4] 杨启云,吴玉道,仲守亮.3D打印专用粉末的特性研究[J].2015年全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会文集:143—147. [5] 黄培云,阮建明. 粉末冶金原理[M].北京: 机械工业出版社,2012:100-102 [6] AP&C.等离子雾化粉末[EB/OL].http://www.tqmmm.com.cn/taifen/?/site/cpti. 2016. [7] 熊博文,徐志锋,严青松,蔡长春.直接选区激光烧结金属粉末材料的研究进展.金属铸锻焊技术,2008,37（9）：92-99. [8] 欧阳鸿武,何世文,刘咏. 金属粉末性能对选区激光烧结件质量的影响[J].粉末冶金材料科学与工程,2004,9（2):106—111. [9] Momeni A, Abbasi S M. Effect of hot working on flow behavior of Ti–6Al–4V alloy in single phase and two phase regions[J]. Materials & Design,2010, 31(8):3599-3604. [10] 林伟凯.3D打印用金属粉末市场分析. 粉体及粉末冶金会刊,2015,40（2）:153-154. [11] 汤慧萍,王建. 金属3D打印中的材料问题及对策.2015年全国粉末冶金学术会议暨海峡两岸粉末冶金技术研讨会文集:68—69. [12] 汤慧萍, 王建, 逯圣路,等. 电子束选区熔化成形技术研究进展[J]. 中国材料进展, 2015, 34(3):225-235. [13] 杨鑫,汤慧萍,葛渊. 粉末性能对电子束选区熔化快速成形的影响[J]. 稀有金属材料与工程,2007,36(A03):574-577. [14] Lagutkin S, Achelis L, Sheikhaliev S, et al. Atomization process for metal powder[J]. Materials Science and Engineering A, 2004, 383(1): 1-6. [15] Liu Y, Niu S; Li F, et al. Preparation of amorphous Fe-based magnetic powder by water atomization[J]. Powder Technology, 2011, 213(1-3):36-40. [16] Feng Y, Qiu T. Preparation, characterization and microwave absorbing properties of FeNi alloy prepared by gas atomization method[J]. Journal of Alloys and Compounds, 2012, 513: 455-459. [17] Yang M, Dai Y, Song C, et al. Microstructure evolution of grey cast iron powder by high pressure gas atomization[J]. Journal of Materials Processing Technology, 2010, 210(2): 351-355. [18] Schulz G.Nanoval. Process Offers Fine Powder Benefits[J].Metal Powder Research,1996,51(11):30-33. [19] Xu J L, Khor K A, Gu Y W, et al. Radio frequency (rf) plasma spheroidized HA powders: powder characterization and spark plasma sintering behavior [J]. Biomaterials, 2005, 26(15): 2197-2207. [20] Lin H F, Liao S C, Hung S W. The do thermal plasma synthesis of ZnO nanoparticles for visible-light photocatalyst [J]. Journal of photochemistry and photobiology A: Chemistry, 2005, 174(1): 82-87. [21] Lee J E, Oh S M, Park D W. Synthesis of nano-sized A1 doped TiO2 powders using thermal plasma[J]. The Solid Films, 2004, 457(1): 230-234. [22] 白柳杨, 袁方利, 胡鹏,等. 高频等离子体法制备微细球形镍粉的研究[J]. 电子元件与材料, 2008, 27(1):20-22. [23] Kobayashi N, Kawakami Y, Kamada K, et al. Spherical submicron-size copper powders coagulated from a vapor phase in RF induction thermal plasma[J]. Thin Solid Films, 2008, 516(516):4402-4406. [24] 国为民,陈生大,万国岩. 用不同方法制取的镍基高温合金粉末性能[J]. 航空工程与维修,1998(2):22-24. [25] 杨鑫,奚正平,刘咏,等. 等离子旋转电极法制备钛铝粉末性能表征[J].稀有金属材料与工程,2010,39(12): 2251-2254. [26] 陈焕铭,胡本芙,李慧英,等.等离子旋转电极雾化FGH95高温合金粉末颗粒凝固组织特征[J].金属学报,2003,39(1): 30-34. [27] AP&C.等离子雾化技术[EB/OL]. http://www.tqmmm.com.cn/taifen/?/site/ourtech/.2016. [28] 汤慧萍,王建,逯圣路,等.电子束选区熔化成形技术研究进展[J].中国材料进展, 2015,34(3):225-235. [29] Hengfeng Gu, Haijun Gong, J. J. S. Dilip, et al. Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting[C].International Solid Freeform Fabrication Symposium. 2014:39-44. [30] Karlsson J, Snis A, Engqvist H, et al. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions[J]. Journal of Materials Processing Technology, 2013, 213(12):2109-2118. [31] Kruth J P, Froyen L, Vaerenbergh J V, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004,149(s 1–3):616-622. [32] Wang Y, Bergstr?m J, Burman C. Characterization of an iron-based laser sintered material[J]. Journal of Materials Processing Technology, 2006, 172(1):77-87. [33] Morgan R, Sutcliffe C J, O'Neill W. Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives[J]. Journal of Materials Science, 2004, 39(4):1195-1205. [34] Rosenthal I, Stern A, Frage N. Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology[J]. Metallography Microstructure & Analysis, 2014, 3(6):1-6. [35] Olakanmi E O,Cochrane R F, Dalgarno K W. Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders[J]. Journal of Materials Processing Technology, 2011, 211(1):113-121.