[1] 左铁钏.高强铝合金的激光加工[M]. 北京: 国防工业出版社, 2002.
[2]喻思, 郎利辉, 刚 王.热等静压成形铝合金粉末的数值模拟研究[J].粉末冶金工业, 2016, 26(2):17-22
[3]Shunv L, Zongde L, Yang W, et al.Ti-based composite coatings with gradient TiC_x reinforcements on TC4 titanium alloy prepared by laser cladding[J].Science China(Technological Sciences), 2014, 57(7):1454-1461
[4]刘珍珍, 王春明, 肖素芬.不同尺寸钛粉末烧结后的显微组织与力学性能分析[J].粉末冶金工业, 2015, 25(3):29-32
[5]范兴平, 杨成.烧结温度对生物医用钛基复合材料性能的影响[J].粉末冶金工业, 2016, 26(6):46-49
[6]柳培, 王爱琴, 郝世明.高硅铝合金及颗粒增强铝基复合材料组织性能的探究[J].粉末冶金工业, 2014, 24(4):45-49
[7]沈晓, 程继贵, 李剑峰.轧膜成形制备-层状功能梯度材料及其性能研究[J].粉末冶金工业, 2016, 26(6):8-14
[8]陈泽军, 陈全忠, 黄光杰.铝_钛_铝三层复合板热轧工艺及微观组织研究[J].材料导报, 2012, 26(3):106-109
[9]李兴华, 杨绍利.钛铝合金制备技术现状及新进展[J].材料导报, 2011, 25(4):94-100
[10]李文虎.复合材料抗热震性研究[J].粉末冶金工业, 2011, 21(5):51-54
[11]Xunzhong G, Minyu F, Zhongli L, et al.Explosive Cladding and Hot Pressing of Ti_Al_Ti Laminates[J].Science Direct, 2017, 46(5):1192-1196
[12]张琛, 杨森, 颜银标.基合金成形技术的研究现状[J].兵器材料科学与工程, 2017, 40(4):126-132
[13] 陈波, 熊华平, 沈强, et al.钎焊方法制备Ti/TiAl/Al系变密度功能梯度材料[J].材料工程, 2011, 2:56-59
[14] 高菲.钛铝金属间化合物/钛合金结构梯度涂层形成机制研究[D]. 哈尔滨工程大学, 2012.
[15]熊华平, 张联盟, 沈强.的连接及系梯度材料的制备[J].金属学报, 1999, 35(10):1053-1056
[16]覃思思, 勇 余, 曾归余.打印用金属粉末的制备研究[J].粉末冶金工业, 2016, 26(5):21-24
[17]Whittaker D.欧洲粉末冶金大会的金属增材制造:高温合金、粉末雾化、喷墨和激光金属沉积工艺的进展[J].粉末冶金工业, 2016, 26(3):1-12
[18] Zhang Z, Yu T, Kovacevic R.Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC[J]. Applied Surface Science, 2017, 410: 225-240.
[19] Wang Q-Y, Xi Y-C, Liu X-Y, et al.Microstructure and mechanical properties of interface between laser cladded Hastelloy coating and steel substrate[J]. Science Direct, 2017, 27: 733-740.
[20] Brandl E, Heckenberger U, Holzinger V, et al.Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior[J]. Materials and Design, 2012, 34: 159-169.
[21]张娟, 李洋波, 孟宪磊.金属粉末激光烧结过程中搭接率敏感性分析[J].粉末冶金工业, 2017, 27(1):31-36
[22]史金光, 翁子清, 金霞.选择性激光熔化高熵合金成形试验[J].工业技术创新, 2017, 04(04):48-52
[23] 陈菊芳, 陈国炎, 孙凌燕, et al.H13钢表面激光熔覆层稀释率及强化效果研究[J]. 激光技术, 2017, (04): 596-601.
[24]杨洗陈, 郑天禧, 张乃坤.合金激光熔敷中对流传质研究[J].金属学报, 1992, 28(02):86-90
[25]张洋, 宋博瀚, 薛峰.稀释率对镍基合金激光熔覆层组织和性能的影响[J].应用激光, 2016, 36(3):259-264
[26]Krishnan M, Atzeni E, Canali R, et al.On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS[J].Rapid Prototyping Journal, 2014, 20(6):449-458
[27]刘锦辉, 史金光, 李亚.选择性激光熔化 合金粉末的成形工艺[J].黑龙江科技大学学报, 2015, 25(5):509-515
[28]袁学兵, 魏青松, 文世峰.选择性激光熔化 合金粉末研究[J].热加工工艺, 2014, 43(4):91-94
[29]赵晓明, 齐元昊, 于全成.铝合金 打印组织与性能研究[J].铸造技术, 2016, 37(11):2402-2404
[30] Huang Y.Characterization of dilution action in laser-induction hybrid cladding[J]. Optics & Laser Technology, 2011, 43: 965-973.
[31] Li R, Li Z, Huang J, et al.Dilution effect on the formation of amorphous phase in the laser cladded Ni–Fe–B–Si–Nb coatings after laser remelting process[J]. Applied Surface Science, 2012, 258: 7956-7961.
[32] Liu K, Li Y, Wang J, et al.Effect of high dilution on the in situ synthesis of Ni–Zr_Zr–Si(B, C) reinforced composite coating on zirconium alloy substrate by laser cladding[J]. Materials and Design, 2015, 87(66-74).
[33]王红颖, 崔承云, 周杰.工具钢表面激光熔覆基合金涂层的组织及性能[J].吉林大学学报工学版, 2010, 40(04):1000-1004
[34] 胡赓祥, 蔡珣, 戎咏华.材料科学基础[M]. 上海: 上海交通大学出版社, 2006.
[35] Wu D, Guo M, Ma G, et al.Dilution characteristics of ultrasonic assisted laser clad yttria-stabilized zirconia coating[J]. Materials Letters, 2015, 141: 207-209.
[36] Zhao G, Cho C, Kim J-D.Application of 3-D finite element method using Lagrangian formulation to dilution control in laser cladding process[J]. Mechanical Sciences, 2003, 45: 777-796.
|