|
|
|
| Research of the Energy Consumption and Carbon Emissions for Copper Tube Extrusion Process |
| WANG An-zhe1, CHEN Zhong-jia1, ZHANG Zhe1, CHEN You-yun1, HAN Yong-zhi2 |
1. School of Materials Science and Engineering, Heifei University of Technology, Hefei 230009, Anhui,China
2. Anhui Jianghuai Automobile Co. ,LTD. Technical Center, Hefei 230601, Anhui, China |
|
|
|
|
Abstract With the severe shortage of the worldwide energy and resources, the energy consumption as well as the usage rate of resources is becoming as equivalently important as the cost of product production, the quality control of manufacturing, such as plastic forming process. The energy consumption and carbon emissions of copper tube extrusion were investigated, and the effect of different process parameters on the energy consumption was also analyzed for cold extrusion and hot extrusion process. Taking into account the auxiliary process of the part manufacturing, the comprehensive energy consumption of cold extrusion is much less than that of the hot extrusion.
|
|
Received: 26 February 2014
Published: 26 June 2014
|
|
|
|
| [8] |
高锦张.塑性成形工艺与模具设计[M]. 北京：机械工业出版社，2007.7 338-344.
|
| [11] |
赵步青.铜及铜合金的热处理. Hardware Science And Technology，1999.
|
| [7] |
马怀宪.金属塑性加工学挤压、拉拔与管材冷轧[M]. 北京：冶金工业出版社，1997:41～43.
|
| [12] |
洪慎章.实用冷挤压模具设计与制造. 北京:机械工业出版社，2010:30.
|
| [1] |
M.F.Rajemi, P.T.Mativenga, A.Aramcharoen. Sustainable Machining:Selection of Optimum Turning Conditions Based on Minimum Energy Considerations[J]. Journal of Cleaner Production, 2010:1059-1065.
|
| [3] |
Nancy Diaz, Moneer Helu, Stephen Jayanathan, Yifen Chen, Arpad Horvath, David Dornfeld.Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments[J]. ISSST，2010.
|
| [9] |
张丹, 晏建军.DEFORM金属挤压成形工艺数值模拟技术[J].现代制造，2011.
|
| [4] |
Anton Dietmair, Member, IEEE, and Alexander Verl.Energy Consumption Modeling and Optimization for Production Machines[J]. ICSET，2008.
|
| [5] |
M.Mori, M. Fujishima, Y. Inamasu, Y. Oda. A study on energy efficiency improvement for machine tools[J]. CIRP Annals - Manufacturing Technology 60 (1):145–148.Mori Seiki Co., Ltd., Nagoya, Japan.
|
| [6] |
中华人民共和国国家统计局.中国统计年鉴2010. 北京：中国统计出版社，2010.
|
| [10] |
J.Zhou, L. Li, J. Duszczyk. 3D FEM simulation of the whole cycle of aluminium extrusion throughout the transient state and the steady state using the updated Largrangian approach[J]. Journal of Materials Processing Technology, 2003(134)：383-397.
|
| [2] |
A.Dietmair, A.Verl. A generic energy consumption model for decision making and energy efficiency optimization in manufacturing[J]. International Journal of Sustainable Engineering, 2009(2):123-133.
|
|
|
|
2014, Vol. 21 
