Abstract:[Al-xMg-12Sn]alloy powder was prepared by mechanical alloying method, and then the powder was pressed and sintered. The effect of Mg addition on microstructure and friction properties of Al-12Sn alloy was studied by X-ray diffraction and scanning electron microscopy. The results show that the addition of Mg makes Sn finer and distribute evenly on the Al matrix. At the same time, Mg destroys the oxide film on the surface of Al particles and increases the sintering activity of Al-12Sn alloy powder. The wear resistance of Al-12Sn alloy powder is significantly improved by adding an appropriate amount of Mg. The alloy has the best mechanical properties and wear resistance when the mass percent of Mg is 0.8%.
收稿日期: 2017-04-10
出版日期: 2018-10-12
通讯作者:
贾建波
E-mail: gbhced89@126.com
引用本文:
贾建波. 机械合金化制备汽车用[Al-xMg-12Sn]合金粉末组织和摩擦性能的研究[J]. , 2018, 28(05): 17-20.
JIA Jian-bo. Study on microstructure and friction properties of[Al-xMg-12Sn]alloy powder for car prepared by mechanical alloying. , 2018, 28(05): 17-20.