(Ti， M)C复式碳化物制备方法的研究进展

doi:10.13228/j.boyuan.issn1006-6543.20160042

摘要
图/表
参考文献
相关文章 (7)

全文: PDF (0 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要对当前(Ti， M)C碳化物的制备方法进行了综述，详细介绍了不同制备方法的制备过程及原理，对不同制备方法的优缺点进行了论述。碳热还原法是目前广泛使用的一种方法，能够制备复杂成分的(Ti， M)C，但该方法耗能大、工艺流程复杂；预合金化法能够制备某些特定成分的碳化物，但其使用范围受限；自蔓延高温合成法可以制备多种成分的(Ti， M)C，但大部分情况下需要预热且存在反应不完全的情况。目前没有一种制备方法同时具有高效、工艺流程简单、适用性强且产物纯度高等优点，对现有制备方法进行改进以满足工业化应用是(Ti， M)C复式碳化物的研究发展方向。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	庞立娟
	邓刚
	张雪峰
	肖洪

关键词 ：（Ti，M）C, 制备方法, 碳热还原法, 自蔓延高温合成

Abstract：The different methods for synthesizing (Ti， M)C carbides were summarized. The preparation process and principle of different preparation methods were introduced in detail， and the advantages and disadvantages of the methods were discussed. Carbon thermal reduction is one of the most widely used methods to prepare (Ti， M)C with complex component， but it has high energy consumption and complex process. Pre-alloying method can prepare some carbides with special components， but its use is limited. Self-propagating high temperature synthesis can prepare various kinds of (Ti， M)C， but most of them need to be preheated and the reaction is incomplete. Generally speaking， there is no preparation method which has the advantages of high efficiency， simple process flow， strong applicability and high product purity， simultaneously. Improvement of the existing preparation methods to meet the industrial application is the research and development direction of (Ti， M)C composite carbide.

Key words： (Ti, M)C Synthesis method Carbothermal reduction Self-propagating high temperature synthesis

收稿日期: 2016-04-21 出版日期: 2017-06-09

通讯作者: 庞立娟 E-mail: 26733982@qq.com

引用本文:

庞立娟，邓刚，张雪峰，肖洪. (Ti， M)C复式碳化物制备方法的研究进展[J]. , 2017, 27(03): 57-62.
PANG Li-juan，DENG Gang，ZHANG Xue-feng，XIAO Hong. Research progress on preparation of (Ti， M)C composite carbides. , 2017, 27(03): 57-62.

链接本文:

http://edit.chinamet.cn/Jweb_fmyjgy/CN/10.13228/j.boyuan.issn1006-6543.20160042 或 http://edit.chinamet.cn/Jweb_fmyjgy/CN/Y2017/V27/I03/57

[1] Toth Louis E.Transistion metal carbides and nitrides[M]. Academic Press. 1971. [2] 刘阳, 曾令可.碳化钛陶瓷及应用[M]. 化学工业出版社. 2008. [3]Didziulis Stephen V.Butcher Kristine DA perspective on the properties and surface reactivities of carbides and nitrides of titanium and vanadium[J].Coordination Chemistry Reviews, 2013, 257(1):93-109 [4]Rajabi A., Ghazali M. J., Syarif J., Daud A. R.Development and application of tool wear: A review of the characterization of TiC-based cermets with different binders[J].Chemical Engineering Journal, 2014, 255:445-452 [5] Yu Haijun, Liu Ying, Ye Jinwen, Yang Jia, Li Pingping, Zhu Yunfeng.Effect of (Ti, W, Mo, V)(C, N) powder size on microstructure and properties of (Ti, W, Mo, V)(C, N)-based cermets[J].International Journal of Refractory Metals and Hard Materials, 2012, 34:57-60 [6]Mari D.Bolognini S,Feusier G.,Cutard T.,Verdon C.,Viatte T.,Benoit W. TiMoCN based cermets: Part I. Morphology and phase composition[J].International Journal of Refractory Metals and Hard Materials, 2003, 21(1–2):37-46 [7]Liu Ning, Chao Sheng, Yang Haidong.Cutting performances,mechanical property and microstructure of ultra-fine grade Ti(C,N)-based cermets[J].International Journal of Refractory Metals and Hard Materials, 2006, 24(6):445-452 [8]Park Sangho, Kang Shinhoo.Toughened ultra-fine (Ti,W)(CN)–Ni cermets[J].Scripta Materialia, 2005, 52(2):129-133 [9]Liu Ying, Jin Yongzhong, Yu Haijun, Ye Jinwen.Ultrafine (Ti,M)(C,N)-based cermets with optimal mechanical properties[J].International Journal of Refractory Metals and Hard Materials, 2011, 29(1):104-107 [10] Chen Xiao, Xiong Weihao, Qu Jun, Yang Qingqing, Yao Zhenhua, Huang Yuzhu.Microstructure and mechanical properties of (Ti, W, Ta)C-xMo-Ni cermets[J].International Journal of Refractory Metals and Hard Materials, 2012, (31):56-61 [11]Kim Young Kwan, Shim Jae-Hyeok, Cho Young Whan, Yang Hyo-Seung, Park Jong-Ku.Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti,Mo)C–Ni cermet without core-rim structure[J].International Journal of Refractory Metals and Hard Materials, 2004, 22(4-5):193-196 [12] Yu Haijun, Liu Ying, Ye Jinwen, Yang Jia, Li Pingping, Zhu Yunfeng.Effect of (Ti, W, Mo, V)(C, N) powder size on microstructure and properties of (Ti, W, Mo, V)(C, N)-based cermets[J]. International Journal of Refractory Metals and Hard Materials, 2012, 34: 57-60. [13]Yu Haijun, Liu Ying, Jin Yongzhong, Ye Jinwen.Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti,W,Mo,V)(C,N)-based cermets[J].International Journal of Refractory Metals and Hard Materials, 2011, 29(5):586-590 [14]Kim Taehyung, Kang Shinhoo.On the quantitative analysis of secondary carbide and carbon in (Ti1?xMx)C solid solutions via XRD measurements[J].International Journal of Refractory Metals and Hard Materials, 2008, 26(5):444-448 [15] Zhang Qiankun, Lin Nan, He Yuehui.Effects of Mo additions on the corrosion behavior of WC–TiC–Ni hardmetals in acidic solutions[J]., 2013, 38:15-25 [16]Cedat Denis, Libert Maximilien, Flem Marion Le, Fandeur Olivier, Rey Colette, Clavel Michel, Schmitt Jean-Hubert.Experimental characterization and mechanical behaviour modelling of molybdenum–titanium carbide composite for high temperature applications[J].International Journal of Refractory Metals and Hard Materials, 2009, 27(2):267-273 [17]Kwon Hanjung, Jung Sun-A, Suh Chang-Yul, Roh Ki-Min, Kim Wonbaek.Mechanical properties of (Ti,V)C–Ni composite prepared using ultrafine solid-solution (Ti,V)C phase[J].Ceramics International, 2014, 40(8):12579-12583 [18]Lin Zihao, Guo Zhixing, Zhou Wei, Wan Weicai, Li Yang.Effect of Mo2C addition on the microstructure and fracture behavior of (W,Ti)C-based[J].Ceramics International, 2014, 40(10):16421-16428 [19]张国鹏, 熊惟皓, 陈珊, 陈肖.基金属陶瓷制备、组织与性能[J].华中科技大学学报自然科学版, 2014, 42(6):43-47 [20]Kim Jiwoong, Seo Moonsu, Kang Shinhoo.Microstructure and mechanical properties of Ti-based solid-solution cermets[J].Materials Science and Engineering A, 2011, 528(6):2517-2521 [21] 林晨光, 邓凤翔, 贺从训.（Ti, W）C固溶体形成的扩散机理研究[J]. 稀有金属, 1989, 6: 480-484. [22]Jung J.Kang SSintered (Ti,W)C carbides[J].Scripta Materialia, 2007, 56(7):561-564 [23]Park S.Kang YJ.,Kwon H. J.,Kang S. Synthesis of (Ti,M1,M2)(CN)–Ni nanocrystalline powders[J].International Journal of Refractory Metals and Hard Materials, 2006, 24(1-2):115-121 [24]张志力, 熊惟皓, 张国鹏.烧结温度对，，-金属陶瓷组织与性能的影响[J].机械工程材料, 2013, 37(12):46-49 [25] 朱运锋, 叶金文, 刘颖, 俞海军.开放体系下碳热还原氮化法制备（Ti、W、Mo、V）(Ｃ, Ｎ)固溶体粉末的研究[J]. 2012, 43(17): 2385-2388. [26]Jin Yongzhong, Liu Ying, Wang Yankun, Ye Jinwen.Influence factors and microstructure evolution during preparation of nanocrystalline (Ti,W,Mo,V)(C,N)–Ni composite powders[J].International Journal of Refractory Metals and Hard Materials, 2009, 27(6):957-961 [27] Dyjak S?awomir, Norek Ma?gorzata, Polański Marek, Cudzi?o Stanis?aw, Bystrzycki Jerzy.A simple method of synthesis and surface purification of titanium carbide powder[J]. International Journal of Refractory Metals and Hard Materials, 2013, 38: 87-91. [28]Kwon Hanjung, Jung Sun-A, Suh Chang-Yul, Roh Ki-Min, Kim Wonbaek.Mechanical properties of (Ti,V)C–Ni composite prepared using ultrafine solid-solution (Ti,V)C phase[J].Ceramics International, 2014, 40(8,PartA):12579-12583 [29] Amorim B.F., Morales M. A., Bohn F., Carri?o A. S., de Medeiros S. N., Dantas A. L. Synthesis of stoichiometric Ca2Fe2O5 nanoparticles by high-energy ball milling and thermal annealing[J]. Physica B: Condensed Matter, 2016, 488: 43-48. [30] Dewa Martinus D.Kurnia, Wiryolukito Slameto, Suwarno Hadi. Hydrogen Absorption Capacity of Fe-Ti-Al Alloy Prepared by High Energy Ball Milling[J]. Energy Procedia, 2015, 68: 318-325. [31] Schmelzer Janett, Baumann Torben, Dieck Sebastian, Krüger Manja.Hardening of V–Si alloys during high energy ball milling[J]. Powder Technology, 2016, 294: 493-497. [32] 李建林, 曹广益, 周勇, 胡克鏊.高能球磨制备TiB_2/TiC纳米复合粉体[J]. 无机材料学报, 2001, (4): 709-714. [33] 张凤林, 崔晓龙, 朱敏, 王成勇.高能球磨制备纳米WC-Co复合粉末及其SPS烧结[J]. 硬质合金, 2007, (2): 80-83. [34] 吴志方，周帆.高能球磨制备Fe-Cu纳米晶过饱和固溶体[J]. 金属热处理, 2015, 12:103-106. [35]Kim Young Kwan, Shim Jae-Hyeok, Cho Young Whan, Yang Hyo-Seung, Park Jong-Ku.Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti,Mo)C–Ni cermet without core-rim structure[J].International Journal of Refractory Metals and Hard Materials, 2004, 22(4-5):193-196 [36] C Slama., D Boulaares. M., A Teber., F Schoenstein., M Abdellaoui., N Jouini. Spark plasma sintering of (Ti0.9W0.1)C powders prepared by mechanical alloying[J]. International Journal of Refractory Metals and Hard Materials, 2014, 43: 250-258. [37] 包艳蓉, 吴国忠, 徐贤, 李岩.热压原位合成(Ti, Mo)C-Ni和(Ti, W, Mo)C-Ni复合材料的组织及性能[J]. 热加工工艺, 2011, 16: 42-46. [38] Rodriguez N, Sanchez J.M, Aristizabal M. Consolidation of (Ti, Mo)(C, N)-Ni cerments by glass encapsulated hot isostatic pressing[J]. Materials Science and Engineering A, 2011, 528: 4453-4461. [39]李劲风, 郑子樵, 张昭, 何国新, 陶小风.体系的自蔓延高温合成与反应机理[J].粉末冶金技术, 2000, 18(2):83-87 [40]李劲风, 张昭, 张鉴清, 郑子樵, 徐协文.含量及预热温度对--体系燃烧合成产物的影响研究[J].稀有金属材料与工程, 2002, 31(1):64-68 [41]潘传增, 张龙, 赵忠民, 张靖, 朱冰.超重力下燃烧合成高硬, 基复合陶瓷[J].硅酸盐学报, 2010, 38(8):1463-1467 [42] 高超, 赵忠民, 张龙, 潘传增, 黄雪刚.超重力下燃烧合成TiC-(Ti, W)C1-x基细晶复合陶瓷研究[J]. 粉末冶金工业, 2011， [43] Azadmehr A, Taheri-Nassaj E.An in situ (W, Ti)C–Ni composite fabricated by SHS method[J]. Journal of Non-Crystalline Solids, 2008, 354: 3223-3234. [44] Saidi A.Reaction synthesis of Fe±(W, Ti)C composites[J]. Journal of Materials Processing Technology, 1999, 89-90: 141-144.