|
|
Influence of SiCp pretreatment on microstructure and performance of SiCp/Al-Si composite |
WANG Rong-qi, XIE Jing-pei, WU Wen-jie, WANG Ai-qin |
(School of Materials Science and Engineering, He’nan University of Science and Technology,Luoyang 471003, China) |
|
|
Abstract SiC particles were pretreated by high temperature roasting and water washing process. SiCp/Al-25Si composite was prepared by vacuum hot pressing. The microstructure and tensile strength of the composite with pretreated or original SiC particles were studied. The results show that the SiCp/Al-25Si composite with pretreated SiC particles has higher interface bonding strength, less pores, and much higher relative density and tensile strength.
|
Received: 10 December 2013
Published: 18 December 2014
|
|
|
|
[1] |
周贤良,吴江晖,张建云,等.电子封装用金属基复合材料的研究现状[J].南昌航空工业学院学报, 2001, 15(1):11-14
|
[2] |
袁秦鲁.SiCp/Al复合材料及其梯度复合材料的制备及性能研究[D]..西安:西安理工大学, 2004, :20-38
|
[3] |
倪增磊,王爱琴.铝基复合材料的制备方法[J].热加工工艺, 2011, 40(20):99-102
|
[4] |
任淑彬,沈晓宇,何新波,等.颗粒及粉末装载量对复合材料热循环行为及力学性能的影响[J].粉末冶金材料科学与工程, 2011, 16(2):196-199
|
[5] |
宁向梅,高积强.反应烧结SiC材料的高温氧化行为研究[D]., 2001, 35(5):270-272
|
[6] |
朱庆山,邱学良,马昌文.高温氧化的热力学研究[J].计算机与应用化学, 1996, 13(2):167-172
|
[7] |
杨伏良,甘卫平.快速凝固粉末冶金制备高硅铝合金材料的组织与力学性能[J].中国有色金属学报, 2004, 14(10):1717-1719
|
[8] |
CLYNE T W, WITHERS P.J. An Introduction to Metal Matrix Composites[M]. .Cambridge: Cambridge University Press, 1993, 13(10):89-154
|
[9] |
曾莉,任学平,王小俐.高体积分数复合材料热变形行为及组织的研究[J].精密成形工程, 2009, 1(1):57-61
|
[10] |
雷运生,孙江勇..SiCp/Al复合材料组织及性能的研究[J].广东有色金属学报, 2006, 16(1):22-25
|
[11] |
徐尊平,程南璞,强华,等.几何特征对颗粒增强基复合材料力学性能行为的影响[J].稀有金属材料工程, 2009, 38(11):1974-1977
|
[12] |
程南璞..SiCp/Al复合材料制备工艺和微观结构及性能研究[D].长沙:中南大学,2007,29-49
|
[13] |
陈良坦,董振荣,黄泰山.差热分析在物化实验中的应用[J].实验研究与探索, 2001, 20(2):96-98
|
[14] |
Ren Shubin, Xinbo He, Xuanhui Qu, et al.Effect of addition to Al-8Mg alloy on the microstructure and thermo-physical properties of SiCp/Al composites prepared by pressureless infiltration[J][J].Materials Science and Engineering B, 2007, 138(1):263-270
|
[15] |
刘文胜,马运柱,黄伯云.粉末冶金新技术与新装备[J].矿冶工程, 2007, 27(5):57-62
|
[16] |
孙旭炜. SiC颗粒表面处理及制备工艺对SiCp/6066Al复合材料组织和性能的影响[D].重庆:西南大学, 2000,25-43
|
[17] |
强华,徐尊平.颗粒几何特征对颗粒增强基复合材料力学行为的影响[J].轻合金加工技术, 2008, 36(10):46-49
|
[18] |
甘卫平,陈招科,杨伏良.真空包套热挤压高硅铝合金粉末材料的研究[J].稀有金属与硬质合金, 2009, 32(3):18-24
|
[19] |
L.LEE,Jung-Ill LEE.L.LEE,Jung-Ill LEE,HO-IN LEEObservation of three-dimensional interfacial morphologies in SiCpAl composites and its characterization[J].Journal of materials science, 1996, 15(10):1539-1542
|
[20] |
樊文军,张胤,张云松.双喷嘴喷射成形柱状坯传热过程模拟[D].内蒙古科技大学, 2010, 10(Z1):165-170
|
|
|
|