|
|
A review of preparation techniques for ceramic particles reinforced iron matrix composites |
ZHANG Fan, WANG Li-ge, WANG En-ze, DU Jun-wu, LIU Kai-xiang |
School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, China |
|
|
Abstract The physical and mechanical properties of ceramic reinforced particles were introduced, and the advantages, disadvantages and application status of some typical preparation techniques for ceramic particles reinforced iron matrix composites were reviewed with emphasis. As for the complex influencing factors for ceramic particles reinforced iron matrix composites, it is pointed out that the combination of existing preparation techniques and computer simulation is an important development direction in the future for the preparation of iron matrix composites.
|
Received: 21 July 2014
Published: 29 April 2015
|
|
|
|
[1] T. SuLi,G. YiMing,L. YeFei. Recent developments in fabrication of ceramic particle reinforced iron matrix wear resistant surface composite using infiltration casting technology[J/OL]. Ironmaking and Steelmaking,(accepted)DIO:http://dx.doi.org/10.1179.1743281213Y.0000000175. [2] L. ZuLai,J. YeHua,Z. Rong,et al. Effect of Cr addition on the microstructure and abrasive wear resistance of WC-reinforced iron matrix surface composites[J]. JOURNAL OF MATERIALS RESEARCH,2014,29(6):778-785.[3] 赵散梅. 陶瓷颗粒增强高铬铸铁基表层复合材料的制备与磨损性能研究[D]. 长沙:中南大学,2012.[4] Z. Kaihong,G. YiMing,L. YeFei. Three-body abrasive wear resistance of iron matrix composites reinforced with ceramic particles[J]. Journal of Engineering Tribology,2014,228(1):3-10.[5] 范瑞瑞. 原位合成法制备Al2O3颗粒增强铁基复合材料[D]. 洛阳:河南科技大学,2012.[6] 周永欣. SiC颗粒增强钢基表面复合材料的制备及冲蚀磨损性能研究[D]. 西安:西安建筑科技大学, 2007.[7] Y. FangXia,H. Mirabbos,X. YunHua, et al. Microstructure, microhardness and wear resistance of VCp/Fe surface composites fabricated in situ[J]. Applied Surface Science,2013,280:297-303.[8] J. Li,B. Y. Zong,Y. M. Wang,et al. Experiment and modeling of mechanical properties on iron matrix composites reinforced by different types of ceramic particles[J]. Materials Science and Engineering A,2010,527(29): 7545-7551.[9] D. Witting,A. Glauche,C. G. Aneziris,et al. Activated pressureless melt infiltration of zirconia-based metal matrix composites[J]. Materials Science and Engineering A,2008,488(1):580-585.[10] W. QianLin;,L. WengGe,Y. YanSheng. Corrosion Behavior of TiC Particle-Reinforced 2Cr13 Stainless Steel[J]. STEEL RESEARCH INTERNATIONAL,2011,82 (6): 719-725.[11] 王恩泽,徐雁平,鲍崇高,等. Al2O3颗粒/耐热钢复合材料的制备及高温磨料磨损性能[J]. 复合材料学报,2004,1:56-60.[12] 章林,刘芳,李志友,等. 颗粒增强型铁基粉末冶金材料的研究现状[J]. 粉末冶金工业,2005,15(1):33-38.[13] T. R. Prabhu,V. K. Varma,S. Vedantam. Effect of SiC volume fraction and size on dry sliding wear of Fe/SiC/graphite hybrid composites for high sliding speed applications[J]. Wear,2014,309(1):1-10.[14] N. Eustathopoulos,M. G. Nicholas,B. Drevet. wettability at high temperatures[M]. Oxford:Pergamon Press,2005.[15] 王家祥,陈宝清,王斐杰,等.熔融纯金属对TiN、TiC陶瓷薄膜的润湿性[J]. 真空,1990,(3):11-15.[16] S. Kalogeropoulou,L. Baud,N. Eustathopoulos. Relationship between wettability and reactivity in Fe/SiC system[J]. Acta Metallurgica et Materialia,1995,43(3):907-912.[17] 高义民. 陶瓷颗粒增强铁基表面复合材料的研究现状与最新进展[J]. 铸造,2012,(9):985-990.[18] 吴金珂,王裕民,侯华,等. 挤压铸造SiCp/AZ91D镁基复合材料的试验研究[J]. 铸造,2014,04:336-340.[19] 杨锐,王筱峻,陈名海,等. Ti元素改性SiCp/2024铝基复合材料的制备及其力学性能表征[J]. 铸造,2014,02:156-161.[20] 吴星平,石锦罡,吴昊,等. 真空搅拌铸造制备SiC颗粒增强ADC12铝基复合材料及其力学性能表征[J]. 材料工程,2014,1:6-11.[21] 郑刘斌. 氧化铝颗粒增强铝基复合材料研究[D]. 北方工业大学,2013.[22] 李婷婷,赵明,方克明,等. 搅拌铸造法制备Al2O3/Al复合材料的微观结构[J]. 特种铸造及有色合金,2013,6:582-585.[23] N. Harnby,M. F. Edwards,A. W. Nienow. Mixing in the process industries[M]. London:Butterworth Heinemann,1997.[24] 赖燕根. 放电等离子烧结WC颗粒增强铁基粉末冶金材料及其性能研究[D]. 广州:华南理工大学,2012.[25] M. Bahraini,E. Schlenther,J. Kriegesmann,et al. Influence of atmosphere and carbon contamination on activated pressureless infiltration of alumina-steel composites[J]. Composites:Part A,2010,41:1511-1515. [26] 贺小刚. Al2O3p/钢基复合材料的挤压铸造与性能研究[D]. 昆明:昆明理工大学,2013.[27] M. ChunXue,Y. JiaKang,X. Chen,et al. Interfacial reactions and bending strength of SiC/A356/FeNi50 composite fabricated by gas pressure infiltration[J]. Transactions of Nonferrous Metals Society of China,2013,32(8):2229–2235.[28] S. Quan,L. ZiLai,J. YeHua,et al. Effect of Ni addition on microstructure of matrix in casting tungsten carbide particle reinforced composite[J]. Journal of materials science and technology,2013,29(8):720-724.[29] Z. Rong ,J. YeHua ,L. DeHong. The effect of volume fraction of WC particles on erosion resistance of WC reinforced iron matrix surface composites[J]. Wear,2003,255(2):134-138.[30] 贺毅强,王娜,乔斌,等. SiC颗粒增强Al-Fe-V-Si复合材料的SiC/Al界面形貌[J]. 中国有色金属学报,2010,20(7):1302-1308.[31] 高丽丽,刘力. 机械合金化的发展[J]. 化工科技,2007,15(1):68-70.[32] 陈君平,施雨湘,张凡,等. 高能球磨中的机械合金化机理[J]. 机械,2004,3:52-54.[33] 张鹏飞. 机械合金化2Si-B-3C-N陶瓷的热压烧结行为与高温性能研究[D]. 哈尔滨工业大学,2013.[34] 崔大伟. 粉末铁基高温合金的制备工艺研究[J]. 潍坊学院学报,2011,11(6):99-102.[35] V. A. Poluboyarov,A. A. Zhdanok,Z. A. Korotaeva,et al. Preparation of WC and W2C by self-propagating high-temperature synthesis using a mixture of tungsten, titanium, and carbon black powders[J]. INORGANIC MATERIALS,2014,50(5):469-472.[36] E. A. Levashov,Y.S. Pogozhev,A. Y. Potanin,et al. Self-propagating high-temperature synthesis of advanced ceramics in the Mo-Si-B system: Kinetics and mechanism of combustion and structure formation[J]. CERAMICS INTERNATIONAL,2013,40(5):6541-6552.[37] K. S. Lohar,A. M. Pachpinde,M. M. Langade,et al. Self-propagating high temperature synthesis, structural morphology and magnetic interactions in rare earth Ho3+ doped CoFe2O4 nanoparticles[J]. Journal of Alloys and Compounds,2014,604:204-210.[38] Y. F. Yang,Q.C. Jiang. Effect of TiB2/TiC ratio on the microstructure and mechanical properties of high volume fractions of TiB2/TiC reinforced Fe matrix composite[J]. International Journal of Refractory Metals and Hard Materials,2013,38:137-139.[39] Z. LiSheng,Y. FangXia,X. YunHua,et al. Microstructure and abrasive wear characteristics of in situ vanadium carbide particulate-reinforced iron matrix composites[J]. Materials & Design,2014,54:564-569. [40] W. ChaoFeng,M. MingXing,L. WenJin,et al. Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition[J]. Journal of rare earths,2009,27(6):997-1002.[41] Martin Marietta Corporation. Process for forming metal-ceramic composites:USA,US4710348A[P]. 1987-12-01.[42] 汤爱涛. 用钛铁矿制备铁基Ti(C,N)复合材料的组织控制和工艺优化[D]. 重庆大学,2004.[43] Magotteaux International S. A. . Composite wear component:USA,US20020136857A1[P]. 2002-11-07.[44] 江苏大学. 一种颗粒增强铝基复合材料铸造性能的计算机模拟方法:中国,CN 101567019A[P]. 2009-10-28.[45] J. B. Ferguson,T. Xee,K. Pradeep,et al. Computational and analytical prediction of the elastic modulus and yield stress in particulate-reinforced metal matrix composites[J]. Scripta Materialia,2014,83:45-48.[46] M. A. Taha,A. M. EL-Sabbagh,M. Soliman,et al. Rolling of cast Al-SiCp particulate metal matrix composites and strip mechanical properties[J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK,2013,44(11):914-917.[47] R. Dingreville,J. Robbins,T. E. Voth. Multiresolution Modeling of the Dynamic Loading of Metal Matrix Composites[J]. JOM,2013,65(2):203-214.[48] K. H. Kate,R. K. Enneti,S. J. Park,et al. Predicting Powder-Polymer Mixture Properties for PIM Design[J]. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES,2014,39(3):197-214.[49] 陈维平,杨少锋,韩孟岩. 陶瓷/铁基合金复合材料的研究进展[J]. 中国有色金属学报,2010,20(2):257-266.[50] K. Konopka,A. Ozieblo. Microstructure and the fracture toughness of the Al2O3-Fe composites[J]. Materials Characterization,2001,46(2):125-129. |
|
|
|