|
|
Sensitivity analysis of overlap rate during DMLS processes |
ZHANG Juan,LI Yang-bo,MENG Xian-lei,ZHANG Shu-yuan |
College of Hydraulic and Environmental Engineering, China Three Gorges University, Yichang 443002, China |
|
|
Abstract According to the actual sintering process of direct metal laser sintering (DMLS), 304 stainless steel powder was used as sintering material, and the temperature field of sintering process was simulated by using Ansys finite element software. Firstly, the change of temperature field in multi pass sintering process was analyzed, and then the influence of different overlap ratio on the temperature field was analyzed. Results show that too low overlap ratio leads to non sintered area between the adjacent sintering channels, while too high overlap ratio causes excessively concentrated temperature and serious heat accumulation. The sintering effect of 304 stainless steel powder is better when the lap ratio is between 26%-33%.
|
Received: 11 August 2016
Published: 28 March 2017
|
|
|
|
[1] 任继文,殷金菊. 选择性激光烧结金属粉末瞬态温度场模拟[J]. 机床与液压,2012,01:114-117.[2] 郭华锋,周建忠,胡增荣. 金属粉末激光烧结温度场的三维有限元模拟[J]. 工具技术,2006,11:13-18.[3] 任继文,刘建书. 工艺参数对316不锈钢粉末激光烧结温度场的影响[J]. 组合机床与自动化加工技术,2010,08:63-66.[4] 沈以赴,顾冬冬,李守卫等. 多组元金属粉末选区激光烧结三维瞬态温度场模拟[J]. 南京航空航天大学学报,2008,05:611-616.[5] 姜献峰,孟祥陈,宋荣伟等. SLM加工中材料状态变化对温度场影响的研究[J]. 应用激光,2015,02:155-159.[6] Michaleris P. Modeling metal deposition in heat transfer analyses of additive manufacturing processes[J]. Finite Elements in Analysis and Design, 2014, 86: 51-60.[7] 沈显峰. 多组元金属粉末直接激光烧结过程数值模拟及烧结区域预测[D].四川大学,2005.[8] 谭真,郭广文.工程合金热物性[M].北京:冶金工业出版社,1996 |
|
|
|