[1]李长生,马彪,宋艳磊,郑建军.无磁钢的研究概况和我国无磁钢的发展思路[J].河南冶金, 2014, 22(1):1-11
[2]赵先存, 杨志勇, 宋为顺, 等.[J]., 2010, :186-215
[3] Liu T, Liu H Y, Zhao Z T, Ma R Z, Hu T D and Xie Y N.Mechanical alloying of Fe-Mn and Fe-Mn-Si[J]., 1999, (271):8-13
[4] Hryha E and Dudrova E.The sintering behaviour of Fe-Mn-C powder system, correlation between thermodynamics and sintering process, manganese distribution and microstructure composition, effect of alloying mode[J].Intech, 2011, (p):573-602
[5] Schroeder R, Filho A T R and Binder Cand Klein A N.Adjusting the sintering cycle of a Hadfield sintered steel produced by metal injection molding [J]., 2015, (18):83-90
[6] Oro R, Campos M, Torralba JM and Capdevila C.Lean alloys in PM: from design to sintering performance[J]., 2012, (55):294-301
[7] Lindsley B and James B.PM steels that contain manganese[J]., , (30):63-73
[8] Salak A and Selecka M.Manganese in Powder Metallurgy Steels[J]., 2012, (p):39-71
[9] 郭庚辰.[J]., 2003, :1-343
[10] Lijun Zhang, Qing Cheng, Honghui Xu and Hai-lin Chen.Thermodynamic description of the Cu-Fe-Mn system with key experiments and its practical applications[J]., 2015, :1306-1318
[11] R M German.Kinetics of Liquid Phase Sintering[J]., 1988, (105A):215-220
[12]Kurgan N.Varol RMechanical properties of PM 316L stainless steel materials[J].Powder Technology, 2010, 201(3):242-247
|