Abstract：This article obtained AgCuTi foil like brazing materials using Powder method and Pack-rolled method respectively, and used two types of AgCuTi foil materials for vacuum brazing of ZrO2 and TC4. The influence of the preparation process of AgCuTi active brazing materials on their welding characteristics was studied. The results showed that due to the rich TiCu particles in the powder method, they were more evenly dispersed in the matrix. During the brazing process, the reaction of the brazing materials was more thorough and uniform, and the concentration gradient of Ti element formed was also smoother, The overall brazing performance is better than that of the Pack-rolled method, with a shear strength of about twice that of the Pack-rolled method, reaching over 60MPa.
[1]王星星，吴港，何鹏，杨晓红，骆静宜，李帅，方乃文，龙伟民.陶瓷/金属异质钎焊连接研究进展[J]．稀有金属材料与工程，2022，51(7)：2689-2696.[2]冯吉才．异种材料连接研究进展[J]．航空学报，2022，43(2)：626413. [3]刘玉华．晶态和非晶钎料连接 ZrO2与Ti6Al4V的组织与强度[D]．长春: 吉林大学博士学位论文，2013．[4]Hong I T, KooC H. Microstructural evolution and shear strength of brazing C103 and Ti-6Al-4V using Ti-20Cu-20Ni-20Zr (wt.%) filler metal [J]. International Journal of Refractory Metals & Hard Materials, 2006, 24: 247-252.[5] 刘桂武,杨刚宾,乔冠军,王红洁,王继平,卢天健. 氧化锆陶瓷润湿及钎焊的研究进展[J]. 稀有金属材料与工程, 2009, (38): 406–410.[6]Chuang T H, Yeh M S, Chai Y H. Brazing of zirconia with AgCuTi and SnAgTi active filler metals[J]. Metallurgical & Materials Transactions A, 2000, 31(6): 1591-1597.[7]Dai X, Cao J, Wang Z, et al. Brazing ZrO2 ceramic and TC4 alloy by novel WB reinforced Ag-Cu composite filler: Microstruc ture and properties[J]. Ceramics International, 2017, 43(17):15296-15305.[8]裴艳虎，李红，黄海新. ZrO2陶瓷与TC4真空钎焊接头组织和性能[J]．焊接，2016，06：22-25.[9] Dai X, Cao J, Liu J, et al. Interfacial reaction behavior and mechanical characterization of ZrO2 /TC4 joint brazed by AgCu filler metal[J]. Materials Science and Engineering: A, 2015, 646: 182-189．[10]Feng J, Dai X, Wang D, et al. Microstructure evolution and mechanical properties of ZrO2/TiAl joints vacuum brazed by Ag–Cu filler metal[J]. Materials Science & Engineering A, 2015, 639:739 -746.
2024, Vol. 31 