非晶C型铁芯切割面腐蚀与磁性能研究

杜宇,杨科,李艳敏,刘宗滨

金属功能材料 ›› 2014, Vol. 21 ›› Issue (5) : 20-23.

欢迎访问《金属功能材料》官方网站!今天是 2025年4月30日 星期三
金属功能材料 ›› 2014, Vol. 21 ›› Issue (5) : 20-23.
试验研究

非晶C型铁芯切割面腐蚀与磁性能研究

  • 杜宇,杨科,李艳敏,刘宗滨
作者信息 +

Investigation of Cross Section Corrosion of Amorphous C-Core and Its Magnetic Performance

  • DU Yu,YANG Ke,LI Yan-min,LIU Zong-bin
Author information +
文章历史 +

摘要

概述了用Fe78Si9B13非晶带材制备C型铁芯的方法,通过电子显微镜、软磁交流测量仪、电感测试仪等研究了非晶C型铁芯切割面微观组织结构与损耗和电感的关系。结果表明:酸液腐蚀可恢复铁芯切口部分非晶带材片层间绝缘,进而降低铁芯损耗值,且频率越高效果越明显,电感量在此过程中上升;酸液腐蚀C型铁芯切割面是恢复片层间绝缘、降低C型铁芯损耗值的有效途径之一。

Abstract

The process method to produce amorphous C-core with Fe78Si9B13 amorphous alloy strips was introduced. The relationships of cross section’s microstructure to core loss and inductance were researched by scan electron microscope (SEM) and soft magnetic AC instrument and inductance tester. The results of research show that the amorphous strip layer insulation in cross section can be recovered by acid corrosion, which led to the decrease of core loss. The decreasing value is more obvious with higher acid corrosion frequency, and inductance is increased during acid corrosion process. Acid corrosion on cross section of amorphous C-core is an effective method to recover layer insulation and decrease core loss.

关键词

非晶合金带材 / C型铁芯 / 电抗器 / 损耗 / 电感量

Key words

Amorphous alloy strip / C-core / Electric reactor / core loss / Inductance

图表

引用本文

导出引用
杜宇, 杨科, 李艳敏, . 非晶C型铁芯切割面腐蚀与磁性能研究[J]. 金属功能材料, 2014, 21(5): 20-23
DU Yu, YANG Ke, LI Yan-Min, et al. Investigation of Cross Section Corrosion of Amorphous C-Core and Its Magnetic Performance[J]. Metallic Functional Materials, 2014, 21(5): 20-23

参考文献

[1]Duwez P, Lin S C H.Formation of Glasses from Liquids and Biopolymers[J].J.Appl.Phys, 1967, 38(38):4096-4096
[2]Klement W, Willens R H, Duwez P.Noncrystalline Structure in Solidified Gold silicon Alloys[J].Nature, 1960, 31(31):869-869
[3]陈孝文, 张德芬, 王斌等.退火工艺对..非晶薄带巨磁阻抗效应的影响[J].金属热处理, 2008, 33(11):96-98
[5]周少雄,卢志超,陈金昌.非晶态物理与软磁材料的产业化[J].物理, 2002, 31(07):431-437
[6]梁迪飞, 余志海, 王昕等.退火温度对_____合金纳米晶软磁特性及微波磁谱的影响[J].金属热处理, 2010, 35(2):16-18
[7] 董冰.非晶、纳米晶合金磁性能的研究[D].东北:东北大学, 2003.
[8]吕俊霞.电抗器的电磁结构及运行维护综述[J].广东输电与变电技术, 2009, 11(4):57-59
[9]吴红波.干式串联铁心电抗器设计中应注意的一些问题[J].高压电器, 2010, 46(006):103-105
[10]田友元.关于并联电抗器的运行问题[J].中国电工技术学会电力电容器专业委员会中国电机工程学会电容装置分专业委员会学术会议, 1998, 1(1):1-8
[11]赵辉.电抗器用铁基非晶纳米晶磁芯[D].南昌:南昌大学,2013:1
[12]张世远.新型纳米晶软磁合金及其应用二[J].磁性材料及器件, 2004, 35(3):1-4
[13]李翔.基非晶及纳米晶在硫酸中的腐蚀研究[J].同济大学学报自然科学版, 2010, 38(7):1042-1045
[14]秦大为.变压器空载损耗中的磁滞损耗和涡流损耗的区分[J].变压器, 2007, 44(9):26-28

12

Accesses

0

Citation

Detail

段落导航
相关文章

/