Abstract:Chemical plating was used to prepare the nickel-artificial diamond powder, and the best formula for preparing uniform and dense coating was found by using the method of orthogonal experiment: the concentration of nickel sulfate is 32 g/L, the concentration of sodium dihydrogen phosphate is 32 g/L, the concentration of citrate is 30 g/L, the concentration of thiourea is 0.002 g/L, pH value of the bath is 4.5, plating temperature is 80 ℃ and plating time is 1.5 h. SEM, EDS and optical microscopy were used to analyse the surface morphology and energy spectrum of artificial diamond powder. It was confirmed that the preparation of Ni coated complex powder by this chemical plating is optimal.
姚 丹, 李成威, 韩凯新, 马 壮, 陈雪婷, 张 武. 人造金刚石表面化学镀镍的试验研究[J]. , 2014, 24(04): 25-30.
YAO Dan, LI Cheng-wei, HAN Kai-xin, MA Zhuang, CHEN Xue-ting, ZHANG Wu. Experimental Study of Chemical Plating Nickel on the Surface of Artificial Diamond. , 2014, 24(04): 25-30.
Wang Y H, Zhang J B, Wang H X, Zhao Y C.Study on the Correlation of Toughness Index and Wear Stages of Diamond[J].Key Engineering Materials, 2001, 1(202-203):147-149
[12]
Wang Y H, Zhang J B, Wang H X, Zhao Y C.Study on the Correlation of Toughness Index and Wear Stages of Diamond[J].Key Engineering Materials, 2001, 1(202-203):199-201
Pimenov S M, Shafeev G A.Electroless metallization of diamond films[J].Diamond and Related Material, 1996, 5(9):1042-1047
[2]
Simakin A V P, Loubnin E N, Shafeevetal G A.Laser-assisted deposition of Pd-doped diamond-like films from liquid hydrocarbons and their use for glass metallization[J].Applied Surface Science, 2002, 186(1-4):227-231
[3]
Breval E, Cheng J P, Agrawal D K.Development of titanium coatings on particular diamond[J].J American Ceram Soci, 2000, 83(8):2106-2109
Wang Y H, Zhang J B, Wang H X, Zhao Y C.Study on the Correlation of Toughness Index and Wear Stages of Diamond[J].Key Engineering Materials, 2001, 1(202-203):289-291