Abstract:Harmonic structure consists of a powder particles surface with fine grains and particles core with coarse grains. The structure consists of a network-like fine grain region filled with islands of coarse grain region. The structure is demonstrated not only strengthen the material but also improve the ductility simultaneously. The harmonic structure and mechanical properties of titanium alloy, stainless steel, high speed steel/low carbon steel, cobalt based alloy and pure copper were analyzed. The key technical points for preparing the harmonic structure were reviewed, including initial powder, severe plastic deformation and hot consolidation.
[1] 太田美绘,飴山惠.―粉末冶金の新しい可能性―調和組織制御法による高強度?高延性材料の創製[J]。粉体および粉末冶金,2015,62(6):297-301。[2] Sanjay Kumar Vajpai, Kei Ameyama, Mie Ota, et al. High performance Ti-6Al-4V alloy by creation of harmonic structure design[J]. Materials Science and Engineering, 2014,63,doi: 10.1088/1757-899x/63/1/012030.[3] 關口達也,今尾亮太.調和組織制御されたTi-6Al-4V燒结体の微细組織と 機械的特性[J]。材料とプロセス,2012,25(163):544。[4] Zhe Zhang, Sanjag Kumar Vajpai, Dmitry Orlor, et al. Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics[J]. Materials Science and Engineering:A,2014,598:106-113.[5] 藤原弘,田中秀征,飴山惠.SPD-PMプロセスによるバイモ-ダル調和組織を有する 材料の諸特性[J]。材料とプロセス ,2009,22(158):1476。[6] Y.Tsuzuki, H. Fujiwara, H.Miyamoto, et al..Deformation behavior of high speed/low carbon steel composite with harmonic structure by MM/SPS process[J]. Materials Science and Engineering, 2014,63(1):52-60.[7] Choncharoen Sawagrat, Osamu Yamaguchi, Samjay Kumar Vajpai, et al..Application of Harmonic Structure Design to Biomedical Co-Cr-Mo Alloy for Improved Mechanical Properties[J]. Materials Transactions, 2014, 55(1):99-105.[8] C. Sawangrat, S Kato, D Orlov, et al. Harmonic-structured copper: performance and proof of fabrication concept based on severe plastic deformation of powders[J]. Journal of Materials Science, 2014, 49(19):6579-6585.[9] H.Fujiwara, S.Takarae, K.Ameyama. Microstructure and Mechanical property of pure Fe powder compact with nano/meso harmonic structure[J]. Strength, plasticity and Fracture in Steels,2009,269-272.[10] M Ota, K. Shimojo, S Okada, et al. Harmonic Structure Design and Mechanical Properties of Pure Ni Compact[J]. Journal of Powder Metallurgy & Mining, 2014,3,doi:0.4172/2168-9806.1000122.[11] Mie. Ota, Sanjay Kumar Vajpai, Ryota Imao, et al. Application of high pressure gas jet mill process to fabricate high performance harmonic structure designed pure titanium[J]. Materials Transactions, 2015,56(1):154-159.[12] 飴山惠,太田美绘,濑尾卓弘,等.調和組織制御された纯Al 組織と機械的性質[J] 材料とプロセス ,2014,27(1):1[13] 藤原,弘, 西本,孝志, 宮本,博之, et al. 調和組織制御されたCu–Sn 合金の微細組織と機械的性質[J]. 粉体および粉末冶金, 2014, 61:521-525.[14] M.Ota, K. Sawai, M. Kawakubo, S.K.Vajpai, et al. Harmonic structure formation and deformation behavior in a(?+?) two phase stainless steel[J]. Materials Science and Engineering, 2014,63,doi:10.1088/1757-899x/63/1/0120272. [15] R.Yoshida, T. Tsuda, H.Fujiwara, et al. Annealing effect on mechanical properties of Ti-Al alloy/pure Ti harmonic structured composite by MM/SPS process[J].Materials Science and Engineering, 2014,63,doi:10.1088/1757-8994/63/1/012031.