自蔓延高温合成涂层技术的研究现状

doi:10.13228/j.boyuan.issn1006-6543.20140096

Abstract
Figure/Table
References
Related Citation (7)

[1]殷声.燃烧合成的发展现状[J].粉末冶金技术, 2001, 19(2):93-97
[2] Merzhanov A G.Self-propagating High-temperature Synthesis: Twenty Years of Search and Findings[Z]. In: Ed by Munir Z A, Holt. J B. Combustion and Plasma Synthesis of High-Temperature Materials, NewYork: VCH publisher, 1990, 1-53.
[3]焦元红，张前.技术及应用研究综述[J].黄石理工学院报, 2006, 22(4):72-75
[4]赵红，杨建桥，张幸红.自蔓延高温合成涂层技术现状及展望[J].材料导报, 2006, 5(20):229-331
[5]杜心康，王建江，尹玉军等.自蔓延高温合成表面涂层技术进展[J].材料发与应用, 2002, 17(2):34-38
[6]严新炎，孙国雄，张树格.铸造技术在材料制备中的应用[J].稀有金属材料与工程, 1996, 25(1):5-8
[7] Odawara O, Ikeuchi J.Study on composite materials with a centrifugal-thermit process[J].Japan Institute of Metals, 1981, (45):316-321
[8]蒋志强，符寒光，杜建铭等.提高复合管内衬陶瓷层性能的进展[J].上海金属, 2004, 26(1):20-25
[9]殷声，郭志猛.陶瓷复合钢管的研究和工业应用[J].材料导报, 2000, 14(12):44-46
[10]王双喜，王建江.氧化铝陶瓷内衬不锈钢复合钢管的组织与性能[J].硅酸盐学报, 1998, 26(6):808-812
[11]Odawara O.Ceramic Lined Pipes Produced by a Centrifugal--Thermit Process[J].Trans. Jpn. Inst. Met., 1985, 26(8):578-586
[12]郭伏安，符寒光.离心自蔓延高温合成陶瓷内衬复合钢管的研究与应用[J].湖南有色金属, 2002, 18(6):27-29
[13]Meng Q S, Chen S P, Zhao J F, et al.Microstructure and mechanical properties of multilayer-lined composite pipes prepared by SHS centrifugal-thermite process[J].Materials Science and Engineering: A, 2007, 456(1):332-336
[14]王建江，赵忠民，张龙等.自蔓延高温合成技术在铸造领域中的应用[J].云南大学学报自然科学版, 2002, 24(1A):170-174
[15]Xue X, Wang Z, Zhou Z, et al.Bonding characteristics of the Al2O3-metal composite coating fabricated onto carbon steel by combustion synthesis[J].International Journal of Minerals, Metallurgy, and Materials, 2014, 21(9):886-893
[16]Niu M, Bi Q, Kong L, et al.A study of Ni3Si-based composite coating fabricated by self-propagating high temperature synthesis casting route[J].Surface and Coatings Technology, 2011, 205(17):4249-4253
[17]李志文，刘长松，黄继华，等.基于自蔓延高温合成的涂层技术[J].粉末冶金技术, 2007, 25(2):135-138
[18] 王冬，张军.90年代铸渗工艺新进展[J].铸造技术, 2000, (3):36-38
[19]Wang Y S, Zhang X Y, Zeng G T, et al.Insitu production of Fe-VC and Fe-TiC surface composites by cast-sintering[J].Composites Part A: Applied Science and Manufacturing, 2001, 32(2):281-286
[20] 胡开华.利用SHS技术制备金属陶瓷局部复合铸钢基材料的研究[J].中国铸造装备与技术, 2007, (3):17-19
[21]纪朝辉，王志平，丁坤英.利用自蔓延高温合成工艺在铸钢表面制备复合材料层[J].铸造, 2007, 56(8):834-836
[22] 曹静，倪锋，魏世忠，张万红.利用SHS-铸造法制备Al2O3-Fe表面复合材料的研究[J].金属铸锻焊技术, 2009, (3):8-13
[23]Wu H, et al.Technological design of metal ceramic composite tube[J].Mater Design, 1999, 20(5):229-232
[24]张中建，金应荣，刘锦云等.气相传输涂层过程中金属的输运介质初探[J].表面技术, 2007, 36(2):14-15
[25] 殷声.燃烧合成[M]. 北京:冶金工业出版社, 1999.
[26]Khinaa B B, Formanekb B, Solpan I.Limits of applicability of the“diffusion-controlled product growth” kinetic approach to modeling SHS[J].Physica B: Condensed Matter, 2005, 355(1-4):14-31
[27]王泽华，王长浩，周泽华，等.高温反应合成金属-陶瓷复合涂层技术的研究现状[J].表面技术, 2012, 41(003):115-119
[28]穆柏春，刘秉余.金属表面化学反应陶瓷涂层的研究[J].硅酸盐通报, 1997, 16(6):19-22
[29]莫淑华，赵红，张幸红.平面铁基陶瓷涂层的法制备[J].中国表面工程, 2009, 22(2):41-44
[30]Dallaire S, Levert H.Synthesis and deposition of TiB2-containing materials by arc spraying[J].Surface and Coatings Technology, 1992, 50(3):241-248
[31]林峰，杨月英，王建江等.自蔓延反应火焰喷涂复相陶瓷涂层研究[J].暨南大学学报：自然科学与医学版, 2007, 28(1):100-104
[32]杜心康，叶明惠，周珑等.自蔓延反应喷涂表面涂层技术进展[J].军械工程学院学报, 2003, 15(4):6-6
[33] Dallaire S.Thick Abrasion-wear Resistant Stainless Steel-TiB2 Coatings Obtained by Arc Spraying SHS Reaction Products[M]. NRCC, Industrial Materials Institute, 1993.
[34] 刘宏伟，殷凤良，郭伟玲.自反应电弧喷涂复相陶瓷涂层工艺研究[J].装甲兵工程学院学报, 2013, (6):85-89
[35]朱警雷，黄继华，王海涛等.反应等离子喷涂-金属陶瓷复合涂层的显微组织[J].中国有色金属学报, 2008, 18(1):36-41
[36]Liu H Y, Huang J H.Reactive flame spraying of TiC–Fe cermet coating using asphalt as a carbonaceous precursor[J].Surface and Coatings Technology, 2006, 200(18):5328-5333
[37]石健，邹开云.利用铝灰制备聚合氯化铝工艺参数的优化[J].南通大学学报：自然科学版, 2011, 10(3):31-34