|
|
Experimental study on fusion bonding of TiC-TiB2 ceramic to Ti-6Al-4V alloy |
MA Tao,MA Jun-peng,QU Wei-liang,FU Jiu-chang |
Troops of 63981 PLA, Wuhan 430311, China |
|
|
Abstract Based on using combustion synthesis to obtain high-temperature TiC-TiB2 ceramic in ultra-high gravity field, the fusion bonding of TiC-TiB2 ceramic to Ti alloy was achieved. Microstructure of the bonding of the ceramic to Ti alloy illustrates that in the super thermal vacuum resulted from the combustion synthesis of TiC-TiB2 and ultra-high gravity field, partial fusion on the surface of Ti alloy and inter-diffusion between the ceramic and Ti alloy are the reason for the achievement of the fusion bonding with constitutional gradient, where fine TiB2 platelets are embedded in the matrix of Ti alloy alternating with Ti-enriched carbides. And a linear decrease of Vickers hardness from the ceramic to Ti alloy in the bonding area is found.
|
Received: 12 March 2015
Published: 08 December 2015
|
|
|
|
[1]M. R. Locatelli, B. J. Dalgleish, K. Nakashima, et al.New approaches to joining ceramics for high-temperature applications[J].Ceramics International, 1997, (23):313-322[2]S. D. Peteves, M. Paulasto, G. Ceccone, et al.The reactive route to ceramic joining: fabrication, interfacial chemistry and joint properties[J].Acta mater, 1998, 46(7):2407-2414[3]A. Muraria, H. Albrechtb, A. Barzona, et al.An upgraded brazing technique to manufacture ceramic-metal joints for UHV applications[J].Ceramics International, 2003, (68):321-328[4] 严有为, 伯康, 汉同, 等.SHS基础研究的现状及展望[J].车工业与材料, 1996, (12):5-9[5] PASCAL C, MARIN AYRAL R M, TEDENAC J C.Joining of nickel monoaluminide to a superalloy substrate by high pressure self-propagating high-temperature synthesis[J].Journal of Alloys and Compounds, 2002, (337):221-225[6]宋亚林, 张龙,赵忠民, 马涛.陶瓷与熔化连接及复合材料制备[J].焊接学报, 2013, 5(34):41-44[7]Zhao, L. Zhang, Y. Song, W. Wang.Microstructures and properties of large bulk solidified TiC-TiB2 composites prepared by combustion synthesis under high gravity[J].Scripta Meter, 2009, (61):281-284[8]潘传增, 张 龙, 赵忠民, 等.超重力下燃烧合成-共晶复合陶瓷研究[J].复合材料学报, 2010, 27(1):109-117[9]马涛, 赵忠民, 万国顺,等.陶瓷与不锈钢超重力场燃烧合成焊接研究[J].粉末冶金工业, 2012, 22(130):46-50[10]V. N. Sanin and V. I. Yukhvid.Centrifugation-Driven Melt Infiltration in High-Temperature Layered Systems[J].Inorganic Materials, 2005, 41(3):247-254.[11] 陈振华, 等.钛与钛合金[M]. 北京: 化学工业出版社, 2005. |
|
|
|