[1]罗爱云, 段隆臣, 王伟雄, 田永常.打滑地层新型孕镶金刚石钻头[J].地质科技情报, 2007, 26(1):109-112[2]潘秉锁, 方小红, 杨凯华.自润滑孕镶金刚石钻头胎体材料初步研究[J].探矿工程岩土钻掘工程, 2009, 36(1):76-78[3]谭建国, 张所邦, 刘健, 宋鸿.鄂西地区坚硬“打滑”地层钻进方法[J].探矿工程岩土钻掘工程, 2011, 38(4):22-24[4]董书山, 吴雪峰, 刘晓阳, 刘益刚.金属预合金粉末与单质粉末在应用中的配伍特点研究[J].超硬材料工程, 2013, 25(1):6-11[5]徐良, 孙友宏, 李治文, 王传留, 孙丙伦, 陈师逊.仿生孕镶金刚石钻头在山东玲珑金矿的试验[J].地质与勘探, 2008, 44(4):79-82[6]张绍和, 杨凯华.主辅磨料双切削作用金刚石钻头研究[J].地质与勘探, 2001, 37(5):88-90[7]王佳亮, 张绍和.基于打滑地层的孕镶金刚石钻头设计[J].地球科学——中国地质大学学报, 2016, 41(5):895-900[8]孙秀梅, 刘建福.坚硬打滑”地层孕镶金刚石钻头设计与选用[J].探矿工程岩土钻掘工程, 2009, 36(8):75-78[9] 刘小磐.陶瓷结合剂金刚石砂轮的制备及磨削性能研究[D]. 湖南长沙: 湖南大学.[10]李旺兴, 李东红, 沈湘黔.提高氧化铝陶瓷断裂韧性的先进途径[J].矿冶工程, 2005, 25(4):73-76[11] 綦亮.金属陶瓷纳米复合粉体的烧结和致密化机理[D].山东济南:山东大学.2014.[12] 付广柱.注射成形制备Cu/Al2O3复合材料工艺研究[D].江苏徐州:中国矿业大学.2014.[13]石永亮, 林涛, 戚翠芬, 等.共沉积反应条件与分散剂对-粉末性能的影响[J].粉末冶金工业, 2017, 27(1):16-21[14]范景莲, 刘勋, 黄伯云, 凌国良, 刘涛.纳米金属陶瓷粉末的热压[J].粉末冶金技术, 2005, 23(2):120-124[15]朱棉霞, 徐序, 李月明, 江玉霞.金属颗粒增韧氧化铝陶瓷研究现状[J].中国陶瓷, 2012, 48(12):10-13[16]李增德, 崔舜, 刘学文, 等.国内-复合材料致密化加工的研究进展[J].粉末冶金技术, 2008, 26(4):304-307 |